Lardo buys another zeddy

[Lardo Boffin]

A nice, working (switches on and can type a small program) kludge fix zeddy:

[Lardo Boffin]

Check out all these type ins!

[1024MAK]

Well, get typing...

Mark

[Lardo Boffin]

Been a while! What with tax and eBay fees (and people’s ridiculous low ball offers on stuff) I have not bought any zeddies for a while as it was just not worth it.

See? Told you I could stop.

Couldn’t resist this lot though. Both zeddies allow stuff to be typed in, the RAM packs both boot up OK (yay! Didn’t have a working 32K one) and the printer feeds through ok. Need to remember how they work to test it a bit better.

Aside from a few dodgy segments, a very unforgiving battery compartment and some reluctant keys the calculator works!

It all needs a really good clean. Especially the battery connections in the calculator.

[sP1d3r]

Both zeddies allow stuff to be typed in, the RAM packs both boot up OK (yay! Didn’t have a working 32K one) and the printer feeds through ok. Need to remember how they work to test it a bit better.

Hmmm, wonder if that 32K Memopak is an MT05 PCB !(?)

[Lardo Boffin]

Both zeddies allow stuff to be typed in, the RAM packs both boot up OK (yay! Didn’t have a working 32K one) and the printer feeds through ok. Need to remember how they work to test it a bit better.

Hmmm, wonder if that 32K Memopak is an MT05 PCB !(?)

I will have a look.

[Lardo Boffin]

It is an MT05-01 PCB.

When I have a few spare minutes I will open it up and take some photos.

[sP1d3r]

It is an MT05-01 PCB.

When I have a few spare minutes I will open it up and take some photos.

Thanks for checking, Lardo.

If you have the inclination and the resources, a dump of the prom would be appreciated or perhaps you could compare it to the dump of the 16K prom that I posted in the Memotech Memopak 16K (wiring diagram) thread.

[Lardo Boffin]

It is an MT05-01 PCB.

When I have a few spare minutes I will open it up and take some photos.

Thanks for checking, Lardo.

If you have the inclination and the resources, a dump of the prom would be appreciated or perhaps you could compare it to the dump of the 16K prom that I posted in the Memotech Memopak 16K (wiring diagram) thread.

Sorry, I don’t have the resources to dump the PROM.

But I do have a dead MT05 motherboard I can send you. Assuming the PROM isn’t dead you may get something of use off it.

[sP1d3r]

Sorry, I don’t have the resources to dump the PROM.

But I do have a dead MT05 motherboard I can send you. Assuming the PROM isn’t dead you may get something of use off it.

Cool, that's doable, I'll PM you.