I released my ZX81+35 ZX-81 clone design files on Github

[1024MAK]

Sending (or replying to) Private Messages (PM) also called Direct Messages (DM) is restricted for new members.

Mark

[mahjongg]

Well, I checked and the keyboard gerber files can be found on the ZX81+35 section of my GitHub entry https://github.com/mahjongg2/ZX81plus35
The same keyboard can also be used for my later design the ZX81+38
use it together with the keyboard overlay .PDF, which when printed full size on an A5 sheet should fit exactly, either with long stems through the circular holes in the overlay, or with short stems simply under the overlay (no hole cutting needed).

Now that I have returned to Github page I found that the ZX81+38 pages were missing a valid BOM (I seem to have not uploaded the real spreadsheet file), and omission I have now fixed. The BOM for revision 1.6 of the ZX81+38 is now available on my GitHub pages.

[8008guy]

Sorry I don’t see the point of yet another replica.

There’s already Grant Searle’s version, and ZX96, ZX97, ZX2000.

If I would build my custom ZX81 it will probably be ZXNU from ZXTeam. It also uses standard components and has build-in flash drive.

Is there a link for the ZXNU Project?

[mrtinb]

Is there a link for the ZXNU Project?

https://forum.tlienhard.com/phpBB3/view ... 016#p11016

[8008guy]

Is there a link for the ZXNU Project?

https://forum.tlienhard.com/phpBB3/view ... 016#p11016

Thanks Martin.