ZEDDYNET

[Paul]

tim just joined the chat!!!!
Ok, another information:
/quit
leaves the chat again.

[tdg8934]

Thanks! All looks like it is working. I did turn on DHCP and it found my IP address 192.168.1.216.

I loaded IRC and followed the instructions to join and it showed myself Tim as well as Paul was there and was chatting with him. Ok now I just need to figure out what to do next with this. At least I know it's working.im going back in...
Thanks again

image.jpeg

My TS1000 with handheld keyboard with ZXpand and Zeddynet

(1.72 MiB) Downloaded 495 times

[PokeMon]

Welcome to Zeddy online world.

[siggi]

HI Tim
if you connect also a ZON-X81 box (or Mr. X or AY-board to zxpand) to your ZX81, you will hear a "DONG" whenever an irc-message arrives (to wake you up )
How much memory do you have installed in your ZX81?

Siggi

[1024MAK]

He said earlier that he's using a ZXpand, so 32k bytes.

am also using a ZXPAND with it.

Tim

Same as I intend to use by the sounds of it (when my Wiznet module arrives).

Mark

[tdg8934]

I do have an AY board that plugs into my ZXPand. I will try this out tonight after work. What a neat idea!

Tim

[Paul]

I just wanted to mention that yesterday new zeddynet PCB arrived.
So if you are interested in a PCB, kit or built then they are available again.
Merry Christmas by the way
Paul

[balford]

And a very Merry Christmas to you too, Paul

I'm interested in purchasing a kit. please.

Thanks!
Brendan

[tdg8934]

Having fun today testing out the Zeddynet card with IRC and IRC ANSI 32 with my ZXPand card. Siggi was great help on the IRC channel which I was chatting with. I also installed and used Mirc in Windows to go into the ZX team channel and communicate with Zeddynet and Sigi. Have to remember to do a CONFIG "M=L" then LOAD, RUN and configure IPCONFIG.p (DNS set to Yes) and then LOAD IRC. More experimenting this weekend.

Tim

[Paul]

The german Post will increase their fees from begin of january. So I am afraid I will need to increase the prices by 50p as well.
I have recalculated the options:
A) PCB only plus programmed GAL: 10£ including postage
B) Kit 19£ including postage
the Kit contains all neccessary parts including what is needed for Pokemon 81xtender. It excludes the WIZ812MJ module.
C) Soldered and tested 25,50£ including postage. It excludes the WIZ812MJ module.

In any way you will need a WIZ812MJ module as well.
Just as an example it's available at TME,Mouser etc.