Good stuff! Thank you.Lardo Boffin wrote: ↑Thu Jun 08, 2023 2:06 pm A few things to look out for in very early zeddies:...
Does anyone know when UK700 PSUs shipped with ZX81s?
- Flatulentia
- Posts: 93
- Joined: Sun May 14, 2023 3:58 pm
- Location: Cambridgeshire, UK
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
ZX81 with ZiLOG Z84 CMOS Z80, 32KB battery-backed Toshiba 55257 SRAM with charge status LED, Wilf's "Why Wait?" mod and switch-mode 5V regulator. 50/60Hz mode switch, composite video output with Zigg's back porch mod and 1080p60 HDMI output.
-
- Posts: 2191
- Joined: Sat Nov 26, 2016 2:42 am
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
Probably an early one:Flatulentia wrote: ↑Thu Jun 08, 2023 2:10 pmGood stuff! Thank you.Lardo Boffin wrote: ↑Thu Jun 08, 2023 2:06 pm A few things to look out for in very early zeddies:...
https://www.ebay.co.uk/itm/275883582098 ... media=COPY
ZX80 PSU and if you look at photo 3 you can see one of the feet is a little squished meaning it is a sponge type not rubber foot.
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
- Flatulentia
- Posts: 93
- Joined: Sun May 14, 2023 3:58 pm
- Location: Cambridgeshire, UK
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
Squidgy!
Never mind. I have a roll of sticky back neoprene foam tape that's exactly the right width to cut ZX81 feet from, so mine may end up with squidgies after I've cracked it open.
Never mind. I have a roll of sticky back neoprene foam tape that's exactly the right width to cut ZX81 feet from, so mine may end up with squidgies after I've cracked it open.
ZX81 with ZiLOG Z84 CMOS Z80, 32KB battery-backed Toshiba 55257 SRAM with charge status LED, Wilf's "Why Wait?" mod and switch-mode 5V regulator. 50/60Hz mode switch, composite video output with Zigg's back porch mod and 1080p60 HDMI output.
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
FTFY.Flatulentia wrote: ↑Fri Jun 09, 2023 11:05 pm Squidgy!
Never mind. I have a roll of sticky back neoprene foam tape that's exactly the right width to cut ZX81 feet from, so mine may end up with squidgies after I've gently opened it up and handled it with tender loving care!.
- Flatulentia
- Posts: 93
- Joined: Sun May 14, 2023 3:58 pm
- Location: Cambridgeshire, UK
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
And no. I'm not the one selling on eBay who's put up a ZX81 with 16KB RAM and composite video mods that looks like it's been run over by a truck.
ZX81 with ZiLOG Z84 CMOS Z80, 32KB battery-backed Toshiba 55257 SRAM with charge status LED, Wilf's "Why Wait?" mod and switch-mode 5V regulator. 50/60Hz mode switch, composite video output with Zigg's back porch mod and 1080p60 HDMI output.
-
- Posts: 2191
- Joined: Sat Nov 26, 2016 2:42 am
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
You would think they would wipe it down a little!
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
- Flatulentia
- Posts: 93
- Joined: Sun May 14, 2023 3:58 pm
- Location: Cambridgeshire, UK
Re: Does anyone know when UK700 PSUs shipped with ZX81s?
And it still went for over £56!
ZX81 with ZiLOG Z84 CMOS Z80, 32KB battery-backed Toshiba 55257 SRAM with charge status LED, Wilf's "Why Wait?" mod and switch-mode 5V regulator. 50/60Hz mode switch, composite video output with Zigg's back porch mod and 1080p60 HDMI output.