DIY 32k ram - external

Discussions about Sinclair ZX80 and ZX81 Hardware
Post Reply
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

DIY 32k ram - external

Post by sirmorris »

Hiya,

There are a number of 32k expansions possible on the '81 and I presume '80. One such design is here:

http://www.zx81.de/english/32k-rame.htm

This seems like a silly newbie question but here goes:

What would be required to make these work as external add-on cards?

I think I know the answer but let's see :D
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: DIY 32k ram - external

Post by Andy Rea »

i'm Still scratching my head wondering why the full 32K is 16K-32K and 48k-64K instead of 16K-48K surely that would make more sense ? As for making this external, i don't see anything particually hard, you would have course have to add a little more decoding for the /RAMCS and also to disable the internal ram at the same time. getting hold of germanium diodes can be a little troublesome these days but i am led to believe that using a schotkey (or however you spell it) diode is ok for this usage.

Regards Andy
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
Zschopower
Posts: 41
Joined: Fri May 09, 2008 11:26 pm
Location: Ilsede-Oberg/ Germany
Contact:

Re: DIY 32k ram - external

Post by Zschopower »

Hi Andy and Sir Morris!

the memory areas 16-32 and 48-64K are a result of "low cost" design. No extra /RAMCS is needed, it works with the internal ZX81 /RAMCS which is low in these two areas only.

If you want to build an external RAM-extension, you must create your own /RAMCS with a LS139 or LS138 e.g. and you must pull the internal /RAMCS to Vpp, when the external RAM is active.

Hope that helps

Peter
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: DIY 32k ram - external

Post by Andy Rea »

Doh ! Thanks Peter i knew it would be something Blindingly obvious.

Andy
what's that Smell.... smells like fresh flux and solder fumes...
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: DIY 32k ram - external

Post by sirmorris »

Brilliant, thanks!
Post Reply