Exclamation point?

[kmurta]

Oh, I feel ashamed as I was the one who started the discord so I sincerely apologize to anyone who was offended. It wasn't my intention, it was just an unfortunate joke.

As a Portuguese-speaking user, there are many more characters missing and this has never been an impediment to extracting maximum usability and fun from the beloved Zeddy. To be honest, I never missed the exclamation point (except when I was porting Super Star Trek, which makes heavy use of these signal).

...and I find it silly that the pound symbol is missing from the Forth implementations found here ...

Not on TF79, where the pound symbol is still present at the SPACE key

Nobody seems to have any qualms over the dollar sign instead of an exclamation mark, anti British bias perhaps?

Absolutely no anti-British bias! The $ sign is not unique to the dollar, it is understood almost universally as a symbol of money and used in many currencies around the world, that's the only reason (for me at least).

Finally, Moggy is right, there are already too many serious things to worry about for us to create intrigue over something so insignificant.

So once again, my sincere apologies.

[roganjosh]

...and I find it silly that the pound symbol is missing from the Forth implementations found here ...

Not on TF79, where the pound symbol is still present at the SPACE key

Shift-SPACE on FIF too.

Alan

[Moggy]

@Kmurta

Kelly please don't apologise for anything it was me that caused all the bad feeling not you or anyone else and for that I'm ashamed!
It was just a terrible day and I took my mood out on Vorticon which was totally wrong and I know that there is no anti British bias on this most cosmopolitan forum which has a world wide membership, just me lashing out, so lads all of you once again apologies.

Yes the pound symbol is there which I should bloody well know as I have both Toddy79 and FIF81 symbol charts on the wall in big letters yet somehow couldn't see it!!!

@Roganjosh.

Yup Alan it would seem that there is none so blind as them that cannot see!

[David G]

The lack of an exclamation mark on the ZX81 has been bugging me for months

I propose a new ROM, where the only change is to have an Exclamation Point

It could replace the useless inverse gray square

Why have two gray squares, that while technically different from each other, look almost exactly the same?

GRAPHICS-A vs GRAPHICS-H ( CHR$(8) versus CHR$(136) )

GRAY SQUARES.png (2.6 KiB) Viewed 19595 times

Change to the ROM 649. I propose calling it ROM 650
; $88 - Character: '!' CHR$(136)
DEFB %00000000
DEFB %00011000
DEFB %00011000
DEFB %00011000
DEFB %00011000
DEFB %00000000
DEFB %00011000
DEFB %00000000

!.png (2.86 KiB) Viewed 19595 times

Then i went to change it and realized there is no separate definition for inverse characters. So while it can replace CHR$(8), and when used in GRAPHICS mode you get the inverse, this would break all the programs that use the gray squares

lesson learned:
* Too late to change the character set now, without affecting the existing body of apps

Ah well, lack of an exclamation point is not a big issue in the overall scheme of things

[Paul]

Well, there is no second gray, it's just inverse grey.
And we can't use the £ because my Zeddy has got a € sign there

[mrtinb]

Yes it seems our beloved ZX81 does not support 7-bit ASCII, but only 6-bit “ZX81CII”. At least it’s better than boudot code, that only had 5 bits.

If you build this little device with 3 chips, you have 16 char sets to swap between AND inverse chars can be replaced with other chars. This brings you 7-bit “ZX81CII”, with the sacrifice of inverse chars.

However your default char set could be the default one with inverse chars.

https://quix.us/timex/rigter/ZXCHR$X4.html

[Paul]

While this works great with ZXPrinter and alphacom printer most other Printer don't support the changed charset.
Maybe it's better to erase the exclamation mark from ASCII and newer because then we would have less shouting in messengers and forums.

[Moggy]

Still useful in Forth though

[Vorticon]

Maybe it's better to erase the exclamation mark from ASCII and newer because then we would have less shouting in messengers and forums.

Excellent point (please note that I refrained from using an exclamation point here despite my vigorous agreement).

[RS232]

Ok why a whole rom when you could just create a UDG for it under EightyOne emulator? Or for a slightly less convincing, you could trick the eye by printing say the number 1 at the same position as the full stop over and over so that the display merges both when you look at the screen

The lack of an exclamation mark on the ZX81 has been bugging me for months

I propose a new ROM, where the only change is to have an Exclamation Point

It could replace the useless inverse gray square

Why have two gray squares, that while technically different from each other, look almost exactly the same?

GRAPHICS-A vs GRAPHICS-H ( CHR$(8) versus CHR$(136) )
GRAY SQUARES.png


Change to the ROM 649. I propose calling it ROM 650
; $88 - Character: '!' CHR$(136)
DEFB %00000000
DEFB %00011000
DEFB %00011000
DEFB %00011000
DEFB %00011000
DEFB %00000000
DEFB %00011000
DEFB %00000000
!.png

Then i went to change it and realized there is no separate definition for inverse characters. So while it can replace CHR$(8), and when used in GRAPHICS mode you get the inverse, this would break all the programs that use the gray squares

lesson learned:
* Too late to change the character set now, without affecting the existing body of apps

Ah well, lack of an exclamation point is not a big issue in the overall scheme of things