CZ1500 ( TS1500 ) composite video mod done
CZ1500 ( TS1500 ) composite video mod done
Ok this CZ1500 is a rebranded argentinian TS1500 runing at 50Hz.. .
I've found at least 2 variants in the 1500 main board and at least three variants in RF modulator.. this I have doesn't have any component attached directly to the board inside the modulator box. In fact the modulator has its own metal floor and a board soldered inside.
First attempts trying to preserve the modulator cage and use the "original" connector failed due to some kind ok a coil soldered underneath the output pin that prevented it to work. So if you want to keep the esthetics you need to carefully desolder the modulator from the board and then desolder the tiny board inside, that is hardly soldered from the bottom ... As I couldn't find any schematics for this board I followed ULA pin53 and marked in the picture were you could take the signal before it is splitted to the mic output.. as I wanted to use the modulator's box I re positioned the wire near the corner to the hole marked in the second picture.. middle wire brings 5v supply.. and the first wire I just kept it cutted... (this computer doesn't have a channel selector as the TS/CZ1000 so I don't know what does that third wire do) (originally it sintonizes to cannel 2). I used the transistor buffer by 1024MAK at https://www.sinclairzxworld.com/viewtop ... 8749#p8749 with the layout by Dessony https://www.sinclairzxworld.com/viewtop ... 493#p35493.. (thank you both). Nice [K] don't you think?...
I've found at least 2 variants in the 1500 main board and at least three variants in RF modulator.. this I have doesn't have any component attached directly to the board inside the modulator box. In fact the modulator has its own metal floor and a board soldered inside.
First attempts trying to preserve the modulator cage and use the "original" connector failed due to some kind ok a coil soldered underneath the output pin that prevented it to work. So if you want to keep the esthetics you need to carefully desolder the modulator from the board and then desolder the tiny board inside, that is hardly soldered from the bottom ... As I couldn't find any schematics for this board I followed ULA pin53 and marked in the picture were you could take the signal before it is splitted to the mic output.. as I wanted to use the modulator's box I re positioned the wire near the corner to the hole marked in the second picture.. middle wire brings 5v supply.. and the first wire I just kept it cutted... (this computer doesn't have a channel selector as the TS/CZ1000 so I don't know what does that third wire do) (originally it sintonizes to cannel 2). I used the transistor buffer by 1024MAK at https://www.sinclairzxworld.com/viewtop ... 8749#p8749 with the layout by Dessony https://www.sinclairzxworld.com/viewtop ... 493#p35493.. (thank you both). Nice [K] don't you think?...
Ernesto
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
- 1024MAK
- Posts: 5118
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: CZ1500 ( TS1500 ) composite video mod done
Yes
Well done
Mark
Well done
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
Re: CZ1500 ( TS1500 ) composite video mod done
That filter in the corner prevents it to work if you want to use the origuinal output.. and the board is tightly soldered to the box at those four points..
Ernesto
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
Re: CZ1500 ( TS1500 ) composite video mod done
I concur with Mark (MAK1024)! Well done! Thumb up! You are welcomed!
Re: CZ1500 ( TS1500 ) composite video mod done
Mark (1024MAK) and the rest of you,
I found a website on a printed circuit board based on your video transistor buffer amplifier circuit design! Just take a look; http://jupiter-ace.co.uk/hardware-KF-video-board.html
Sincerely yours,
DesSony
I found a website on a printed circuit board based on your video transistor buffer amplifier circuit design! Just take a look; http://jupiter-ace.co.uk/hardware-KF-video-board.html
Sincerely yours,
DesSony
Re: CZ1500 ( TS1500 ) composite video mod done
It still has Mark's signature on the diagramdessony wrote: ↑Sat Aug 15, 2020 1:14 pm Mark (1024MAK) and the rest of you,
I found a website on a printed circuit board based on your video transistor buffer amplifier circuit design! Just take a look; http://jupiter-ace.co.uk/hardware-KF-video-board.html
Sincerely yours,
DesSony
Ernesto
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
ZX80 USA, ZX81UK, ZX Spectrum, ZX Spectrum+, ZX Spectrum 128+ UK, ZX Spectrum +2/A, Sinclair QL, CZ1000, CZ1500, CZ2000, CZ1000Plus, CZ1500Plus, CZ Spectrum, CZ Spectrum Plus, TK83, TK85, TK90X, TK95. TS2068. And more to come
Re: CZ1500 ( TS1500 ) composite video mod done
It would be nice to give credit for other peoples works at least. I know of one person (who I shan't give any publicity to) who has ripped off the ZXpand design though I have yet to see them being offered for sale.
-
- Posts: 122
- Joined: Wed Apr 08, 2020 4:48 am
- Location: San Francisco
Re: CZ1500 ( TS1500 ) composite video mod done
It looks like miss-attribution rather than no attribution.
The person received the Gerber files from Klaudiusz Fatla and attributes the design to him with a thank you.
Likely the correct attribution got lost in the handoffs.
It would be kind to let them know of the error as they seem to want to give credit correctly.
The person received the Gerber files from Klaudiusz Fatla and attributes the design to him with a thank you.
Likely the correct attribution got lost in the handoffs.
It would be kind to let them know of the error as they seem to want to give credit correctly.
Re: CZ1500 ( TS1500 ) composite video mod done
Hi All,
Please accept my apology in regards of my JA Video Buffer board. I've never claimed that the circuit's design was mine. I did the PCB layout and clearly stated on the schematic diagram who should get credits for it.
Please accept my apology in regards of my JA Video Buffer board. I've never claimed that the circuit's design was mine. I did the PCB layout and clearly stated on the schematic diagram who should get credits for it.
- Attachments
-
- JACE_vout_sch_v0.1.pdf
- (39.5 KiB) Downloaded 231 times
Claudius
----------
----------