Saving a z81 file in eightyone as .P or TZX

Emulator and emulator development specific topics
Post Reply
User avatar
bodkinz
Posts: 12
Joined: Sat Jun 21, 2014 7:20 pm
Location: London

Saving a z81 file in eightyone as .P or TZX

Post by bodkinz » Sun Sep 16, 2018 12:32 pm

I managed to do this a couple of years ago.. and have been trying hard to repeat this yesterday without success.
Can someone please do a step by step for this procedure before I lose all my hair.. I have looked on here for help but it still doesnt seem to work. I know I am probably doing something wrong.

Thanks in advance

Chris

OK!!!! I was missing something vital out.... I wasn't "SAVING" the file.. DOH!

User avatar
Andy Rea
Posts: 1503
Joined: Fri May 09, 2008 2:48 pm
Location: notts UK

Re: Saving a z81 file in eightyone as .P or TZX

Post by Andy Rea » Sun Sep 16, 2018 3:12 pm

Not at the computer right now but IIRC, you need to bring up. The virtual tape deck and from there you can save files, only single entries can be saved as .P files where as multiple files can be saved as .TZX

Hope this helps.

Andy
6 x ZX81, 1 x TS1500 , 1 x +3e, 1 x timex 2040 printer, 1 x timex 2020 cassette deck, siclair printer and some spectrum

User avatar
XavSnap
Posts: 520
Joined: Sat May 10, 2008 4:23 pm

Re: Saving a z81 file in eightyone as .P or TZX

Post by XavSnap » Mon Sep 17, 2018 5:24 pm

"Saving a z81 file in eightyone as .P or TZX"
load the memory snapshot "Z81" and type save"hello" ...
:mrgreen:

User avatar
XavSnap
Posts: 520
Joined: Sat May 10, 2008 4:23 pm

Re: Saving a z81 file in eightyone as .P or TZX

Post by XavSnap » Mon Sep 17, 2018 6:45 pm

Vb81:
Capture.JPG

Post Reply