Saving a z81 file in eightyone as .P or TZX

Emulator and emulator development specific topics
Post Reply
User avatar
bodkinz
Posts: 12
Joined: Sat Jun 21, 2014 7:20 pm
Location: London

Saving a z81 file in eightyone as .P or TZX

Post by bodkinz »

I managed to do this a couple of years ago.. and have been trying hard to repeat this yesterday without success.
Can someone please do a step by step for this procedure before I lose all my hair.. I have looked on here for help but it still doesnt seem to work. I know I am probably doing something wrong.

Thanks in advance

Chris

OK!!!! I was missing something vital out.... I wasn't "SAVING" the file.. DOH!
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: Saving a z81 file in eightyone as .P or TZX

Post by Andy Rea »

Not at the computer right now but IIRC, you need to bring up. The virtual tape deck and from there you can save files, only single entries can be saved as .P files where as multiple files can be saved as .TZX

Hope this helps.

Andy
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: Saving a z81 file in eightyone as .P or TZX

Post by XavSnap »

"Saving a z81 file in eightyone as .P or TZX"
load the memory snapshot "Z81" and type save"hello" ...
:mrgreen:
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
User avatar
XavSnap
Posts: 1940
Joined: Sat May 10, 2008 4:23 pm
Location: 'Zx81 France' Fb group.

Re: Saving a z81 file in eightyone as .P or TZX

Post by XavSnap »

Vb81:
Capture.JPG
Xavier ...on the Facebook groupe : "Zx81 France"(fr)
Post Reply