Wanted : 2xZX81 (Working and Broken) & ZX Printer

ZX80 / ZX81 hardware and software requested for either sale or swapping
Post Reply
Jamtex
Posts: 7
Joined: Mon Apr 09, 2012 3:21 am

Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by Jamtex »

I am after 2 ZX81s for a museum exhibition, I plan to use one with a ZXpand and use the other one (which should be in reasonable condition) with a ZX Printer for a display.

Hopefully I can get two reasonablely cheaply...
RWAP
Posts: 1348
Joined: Thu May 08, 2008 8:42 am
Location: Stoke-on-Trent, UK
Contact:

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by RWAP »

Whereabouts are you based ?

I have some ZX81s and ZX Printers here which are untested....

Rich
Jamtex
Posts: 7
Joined: Mon Apr 09, 2012 3:21 am

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by Jamtex »

Me personally, am based all over the world, depending on where this exhibition is.

However the units will be sent to London.

If you could test one then that would be great. I only really need the loose unit as I have lots of PSUs and RF cables. The other ZX81 if it works then it is a bonus, but otherwise it should look in great condition ditto with the printer, although a half roll of paper would be nice for display too.

Thanks
RWAP
Posts: 1348
Joined: Thu May 08, 2008 8:42 am
Location: Stoke-on-Trent, UK
Contact:

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by RWAP »

I shall see if I can find time to do some testing - main issue is that I don't have a TV which can display a ZX81 !!
RWAP
Posts: 1348
Joined: Thu May 08, 2008 8:42 am
Location: Stoke-on-Trent, UK
Contact:

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by RWAP »

I have checked - I have a working ZX81 (with new keyboard membrane) and a ZX Printer which is also working - both in excellent condition.

I have a second ZX81 which is non-working, but alas I do not have a good condition case top to go with it - does anyone else ?

There is also the original PSU, and polystyrene box plus outer cardboard sleeve for the ZX81 (no nice ZX81 box though).

PM me if you are interested and make an offer.

Rich
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by PokeMon »

RWAP wrote:I shall see if I can find time to do some testing - main issue is that I don't have a TV which can display a ZX81 !!
Why not put a ZXVid into it ? :mrgreen:
paulsebastian77
Posts: 2
Joined: Sat Jun 30, 2012 10:20 am

Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer

Post by paulsebastian77 »

i have an sinclair zx 81 full pack,full woking,i wanna sell it urgently
thx to this forum,i don`t know where to post it
nauticaforme@yahoo.com,if anyone is interested in it ,urgently !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Post Reply