I am after 2 ZX81s for a museum exhibition, I plan to use one with a ZXpand and use the other one (which should be in reasonable condition) with a ZX Printer for a display.
Hopefully I can get two reasonablely cheaply...
Wanted : 2xZX81 (Working and Broken) & ZX Printer
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
Whereabouts are you based ?
I have some ZX81s and ZX Printers here which are untested....
Rich
I have some ZX81s and ZX Printers here which are untested....
Rich
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
Me personally, am based all over the world, depending on where this exhibition is.
However the units will be sent to London.
If you could test one then that would be great. I only really need the loose unit as I have lots of PSUs and RF cables. The other ZX81 if it works then it is a bonus, but otherwise it should look in great condition ditto with the printer, although a half roll of paper would be nice for display too.
Thanks
However the units will be sent to London.
If you could test one then that would be great. I only really need the loose unit as I have lots of PSUs and RF cables. The other ZX81 if it works then it is a bonus, but otherwise it should look in great condition ditto with the printer, although a half roll of paper would be nice for display too.
Thanks
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
I shall see if I can find time to do some testing - main issue is that I don't have a TV which can display a ZX81 !!
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
I have checked - I have a working ZX81 (with new keyboard membrane) and a ZX Printer which is also working - both in excellent condition.
I have a second ZX81 which is non-working, but alas I do not have a good condition case top to go with it - does anyone else ?
There is also the original PSU, and polystyrene box plus outer cardboard sleeve for the ZX81 (no nice ZX81 box though).
PM me if you are interested and make an offer.
Rich
I have a second ZX81 which is non-working, but alas I do not have a good condition case top to go with it - does anyone else ?
There is also the original PSU, and polystyrene box plus outer cardboard sleeve for the ZX81 (no nice ZX81 box though).
PM me if you are interested and make an offer.
Rich
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module
Also Involved in:
Icephorm
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
Why not put a ZXVid into it ?RWAP wrote:I shall see if I can find time to do some testing - main issue is that I don't have a TV which can display a ZX81 !!

-
- Posts: 2
- Joined: Sat Jun 30, 2012 10:20 am
Re: Wanted : 2xZX81 (Working and Broken) & ZX Printer
i have an sinclair zx 81 full pack,full woking,i wanna sell it urgently
thx to this forum,i don`t know where to post it
nauticaforme@yahoo.com,if anyone is interested in it ,urgently !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
thx to this forum,i don`t know where to post it
nauticaforme@yahoo.com,if anyone is interested in it ,urgently !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11