eBay: TRACO voltage regulator

ZX80 / ZX81 hardware and software offered for sale or swapping
Post Reply
David G
Posts: 632
Joined: Thu Jul 17, 2014 7:58 am
Location: 48 North

eBay: TRACO voltage regulator

Post by David G »

TRACO TSR 1-2450 DC/DC Switching Regulator - pin compatible replacement for the 7805 power regulator used in the ZX81

https://www.ebay.com/sch/i.html?_nkw=TSR+1-2450

$6.99 USD buy-it-now + $6 shipping within USA from seller American Retro Shop

the listing says
Better thermal management, reducing temperatures in the case and doesn't require use of heat sinks.
- Increased power efficiency (>94%)
- Improved output accuracy (±2%)
- Short circuit protection
- Built in filter capacitors
- Excellent line / load regulation
Attachments
TRACO.jpg
Lardo Boffin
Posts: 2256
Joined: Sat Nov 26, 2016 2:42 am

Re: eBay: TRACO voltage regulator

Post by Lardo Boffin »

I’ve used those in the past but found I needed to fit them horizontally rather than vertically due to lack of space in the case. This was a bit of a faff on!

I ended up using these MuRata:

https://www.retroleum.co.uk/spectrum-repairs-mods
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
David G
Posts: 632
Joined: Thu Jul 17, 2014 7:58 am
Location: 48 North

Re: eBay: TRACO voltage regulator

Post by David G »

That's quite reasonable price at Retroleum. Unfortunately they are out of stock

Appears to be muRata OKI-78SR-W36H (horizontal), but with the connector modded to be on the bottom of the board instead of the top. Also: "Can also be used in the ZX81 (splay out the outer legs slightly when fitting)"

unmodded
OKI-78SR-W36H.jpg
Post Reply