Page 10 of 32
Re: Lardo buys another zeddy
Posted: Tue Sep 08, 2020 2:49 pm
by Lardo Boffin
And the final one for a while...
A very nice condition issue one I think even though the underside of the PCB is red. Working, as is the RAM pack! The PSU gives out 16V which is a little high.
Re: Lardo buys another zeddy
Posted: Tue Sep 08, 2020 2:51 pm
by Lardo Boffin
I call this zedddy corner.
Re: Lardo buys another zeddy
Posted: Tue Sep 08, 2020 3:33 pm
by Moggy
Soon to be refurbished and new homes found for them.
Nice one Lardo.
Re: Lardo buys another zeddy
Posted: Wed Mar 31, 2021 4:45 pm
by Lardo Boffin
Its been a while! The last four took a while to sort and sell.
A very nice issue three boxed and working with all the gubbins.
Re: Lardo buys another zeddy
Posted: Wed Mar 31, 2021 5:20 pm
by Moggy
He's back folks!!
Re: Lardo buys another zeddy
Posted: Thu Apr 29, 2021 6:32 pm
by Lardo Boffin
And another arrived today. Works fine (aside a few dead keys) and produces a pretty good picture for an early one!
Nice kludge fix moment:
Only down side is that I don’t like refurbing these - seems a bit wrong not to keep them original.
Re: Lardo buys another zeddy
Posted: Thu Apr 29, 2021 8:56 pm
by Moggy
In which case just fit a keyboard and composite jobby, originality more or less kept but usable on a modern TV and quick turn around.
Re: Lardo buys another zeddy
Posted: Thu Apr 29, 2021 9:08 pm
by Lardo Boffin
Moggy wrote: ↑Thu Apr 29, 2021 8:56 pm
In which case just fit a keyboard and composite jobby, originality more or less kept but usable on a modern TV and quick turn around.
Makes sense to me!
Re: Lardo buys another zeddy
Posted: Mon May 10, 2021 3:20 pm
by Lardo Boffin
And another one. A reasonable condition bugged ROM that switches on and produces a nice dark K.
It would be nice to get one I don’t feel bad about modernising.
Re: Lardo buys another zeddy
Posted: Tue May 18, 2021 3:02 pm
by Lardo Boffin
I appear to be back in business! I prefer to buy them in the warm weather as I have to work on them in an unheated garage…
Not tried the printer or tapes yet but everything else works ok.
Edit: a nice yellow PCB issue one.
With a 622 ROM.