Has anyone fitted a Wespi to a zeddy with one these ULAs?
I wonder if it will work as I seem to remember that the ULA has a built in amplifier?
I know tape loading on these meant that the volume was approx 2/10 rather than the usual 7/10.
Fitting a Wespi with an Andy Rea ULA
-
- Posts: 2173
- Joined: Sat Nov 26, 2016 2:42 am
Fitting a Wespi with an Andy Rea ULA
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
Re: Fitting a Wespi with an Andy Rea ULA
I have this ULA, and a Wespi connected. It's working fine.
-
- Posts: 2173
- Joined: Sat Nov 26, 2016 2:42 am
Re: Fitting a Wespi with an Andy Rea ULA
Excellent news thanks!
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
Re: Fitting a Wespi with an Andy Rea ULA
Hi Martin, with a jumper or with a resistor fitted at the TV type pins (missing on Lardo's picture)
In theory, there is no difference between theory and practice. But, in practice, there is.
Re: Fitting a Wespi with an Andy Rea ULA
I use nothing connected.
Re: Fitting a Wespi with an Andy Rea ULA
Thanks Martin, I need to reread the instructions. Thought one of the two had to be mounted.
Anyway, valuable information for future wespi users that this ULA works in that configuration.
Anyway, valuable information for future wespi users that this ULA works in that configuration.
In theory, there is no difference between theory and practice. But, in practice, there is.
-
- Posts: 2173
- Joined: Sat Nov 26, 2016 2:42 am
Re: Fitting a Wespi with an Andy Rea ULA
I finally have a fast storage device in my rebuilt zeddy!
Now I just need to figure out loading from a physical tape with this connected and I will be sorted.
Now I just need to figure out loading from a physical tape with this connected and I will be sorted.
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA