Page 9 of 17
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Wed Mar 08, 2023 8:02 am
by Lardo Boffin
Nice!
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Mon Mar 13, 2023 8:26 pm
by Pepperm17
Sorry if this is a stupid question but...where do I get the .BIN files for the ZX-WESPI project to write to my ESP please? Do I have to compile them or can they just be downloaded from somewhere please?
Mark
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Mon Mar 13, 2023 9:10 pm
by mrtinb
The first version, and you can find the files under releases in the right column.
https://github.com/holmatic/zx-iot-mi
The second version, which includes video output to mini LCD or VGA, and here you also find the files under releases.
https://github.com/holmatic/zx-iot-video
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Mon Mar 13, 2023 9:54 pm
by Pepperm17
Thanks
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Fri Mar 24, 2023 2:08 pm
by patters
Lardo Boffin wrote: ↑Mon Feb 13, 2023 12:41 pm
patters wrote: ↑Sun Feb 12, 2023 9:31 pm
Lardo Boffin wrote: ↑Thu Jan 26, 2023 12:19 am
And if you want to load from a tape still then I go for this arrangement:
3B47D860-5AC8-4395-B1ED-22584A685A08.jpeg
My WESPI doesn't kick in when I connect something to the tape sockets, no further mods required. I can load fine from my TZXDuino.
That is awesome! I have fitted at least 10 of these now and not one could I get to work with my TZXDuino without all the hassle of adding a switch.
Can you add a photo / details of how you installed please? Thanks!
I'm the starter of this thread so my photos are already in here - the build in the first post, and the connections to the board can be seen in one of the later posts where I show how I mounted the ESP32 with velcro.
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Fri Mar 24, 2023 8:28 pm
by Lardo Boffin
Thanks.
Doesn’t look any different to any of the ones I fitted.
Hey ho. Guess I will have to stick with the switches.
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Tue Apr 04, 2023 9:50 pm
by mikeh_nz
nama wrote: ↑Wed Mar 08, 2023 7:40 am
Boards arrived
Nama - how are they looking?
Do you know how what resolution the vga output is at?
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Sun Apr 09, 2023 1:16 am
by bgrier
Hi everyone, thought I'd jump on the ZX-Wespi PCB bandwagon so designed a board for the non-vga MI version.
I have a Timex Sinclair 1000 and have decided to mount the Wespi externally. Mostly as the TS1000 has that aluminum spray RF shielding inside the case. Probably not a huge factor but why put some shielding between the radio and the hotspot 'eh?
So here's my design. I wanted to keep the footprint as small as possible, so designed it as a 'hat' to fit on the ESP32.
And put it in a case to keep things nice and tidy.
And give it some bling with the built-in blinkenlights
So it's still in development, refining the PCB design and the case design, but I think I'm almost there.
And yeah, I obviously decided to have some fun with the silkscreen layer, because, why not?
Questions, comments, feedback, always welcome
--Brad
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Sun Apr 09, 2023 1:40 am
by Spinnetti
Nicely done!
Re: ZX-WESPI - add a cheap wifi-enabled fileserver to your Zeddy!
Posted: Sun Apr 09, 2023 2:20 am
by mikeh_nz
I love it!!