3D printed Edge Connector

Discussions about Sinclair ZX80 and ZX81 Hardware
Post Reply
mcarlson_sb
Posts: 122
Joined: Wed Apr 08, 2020 4:48 am
Location: San Francisco

3D printed Edge Connector

Post by mcarlson_sb »

I found myself needing an edge connector to prototype an external keyboard.
All I had laying round were 5.25" floppy edge connectors. Which are close enough to kind of work (keyed wrong, not long enough) but not ideal.

So my wife and I came up with a 3D printable version that works pretty well.
It's made for 22 gauge solid core wire.

https://www.thingiverse.com/thing:4285022
20200413_205813.jpg
20200413_205856.jpg
20200413_200544.jpg
20200413_200555.jpg
Post Reply