ZXPand vs ZXPand+ ?

Discussions about Sinclair ZX80 and ZX81 Hardware
Post Reply
tdg8934
Posts: 304
Joined: Mon Sep 23, 2013 6:10 pm

ZXPand vs ZXPand+ ?

Post by tdg8934 »

I have both a ZXPand (and AY daughter board plugged in) as well as a ZXPand+ where my SD card carrier with micro SD card works in the ZXPand+ but when I swap the SD card carrier with micro SD card over to the ZXPand it does not work (no K). I was thinking perhaps the ZXPand needs it's own SD card carrier with micro SD card with a lower version of firmware perhaps. Could this be the reason why my ZXPand is not working. It's been a while since I have had them turned on also. (TS1000).

Thanks - Tim
tdg8934
Posts: 304
Joined: Mon Sep 23, 2013 6:10 pm

Re: ZXPand vs ZXPand+ ?

Post by tdg8934 »

I found this firmware link for the ZXPand: https://www.sinclairzxworld.com/viewtop ... f=13&t=913

and this for the firmware link for the ZXPand+: viewtopic.php?f=13&t=2430&p=25720&hilit=ZXPANDFW#p25720
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZXPand vs ZXPand+ ?

Post by Andy Rea »

put the sd in after powering on and see if it is recognised do a CAT
what's that Smell.... smells like fresh flux and solder fumes...
Post Reply