I released my ZX81+35 ZX-81 clone design files on Github

Discussions about Sinclair ZX80 and ZX81 Hardware
User avatar
1024MAK
Posts: 5103
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: I released my ZX81+35 ZX-81 clone design files on Github

Post by 1024MAK »

Sending (or replying to) Private Messages (PM) also called Direct Messages (DM) is restricted for new members.

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
User avatar
mahjongg
Posts: 181
Joined: Tue Nov 24, 2015 10:25 pm

Re: I released my ZX81+35 ZX-81 clone design files on Github

Post by mahjongg »

Well, I checked and the keyboard gerber files can be found on the ZX81+35 section of my GitHub entry https://github.com/mahjongg2/ZX81plus35
The same keyboard can also be used for my later design the ZX81+38
use it together with the keyboard overlay .PDF, which when printed full size on an A5 sheet should fit exactly, either with long stems through the circular holes in the overlay, or with short stems simply under the overlay (no hole cutting needed).

Now that I have returned to Github page I found that the ZX81+38 pages were missing a valid BOM (I seem to have not uploaded the real spreadsheet file), and omission I have now fixed. The BOM for revision 1.6 of the ZX81+38 is now available on my GitHub pages.
8008guy
Posts: 53
Joined: Mon May 14, 2018 11:26 pm

Re: I released my ZX81+35 ZX-81 clone design files on Github

Post by 8008guy »

mrtinb wrote: Tue Sep 17, 2019 7:37 am Sorry I don’t see the point of yet another replica.

There’s already Grant Searle’s version, and ZX96, ZX97, ZX2000.

If I would build my custom ZX81 it will probably be ZXNU from ZXTeam. It also uses standard components and has build-in flash drive.
Is there a link for the ZXNU Project?
User avatar
mrtinb
Posts: 1906
Joined: Fri Nov 06, 2015 5:44 pm
Location: Denmark
Contact:

Re: I released my ZX81+35 ZX-81 clone design files on Github

Post by mrtinb »

8008guy wrote: Wed Nov 03, 2021 4:20 am Is there a link for the ZXNU Project?
https://forum.tlienhard.com/phpBB3/view ... 016#p11016
Martin
https://zx.rtin.be
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube
8008guy
Posts: 53
Joined: Mon May 14, 2018 11:26 pm

Re: I released my ZX81+35 ZX-81 clone design files on Github

Post by 8008guy »

mrtinb wrote: Wed Nov 03, 2021 6:51 am
8008guy wrote: Wed Nov 03, 2021 4:20 am Is there a link for the ZXNU Project?
https://forum.tlienhard.com/phpBB3/view ... 016#p11016
Thanks Martin.
Post Reply