ZX81/TS1000 Rubber Feet

[msansom]

Two questions:

1.) Does anyone know what will get the adhesive from the rubber feet off the plastic case without harming the case?

2.) Does anyone have a source for replacement feet?

[PokeMon]

http://www.sellmyretro.com/offer/detail ... r-psu-1965

I removed rest of the glue with a screw driver - scratched it off.
I am not a collector - so no problem for me.
Anyway - you won't see any scratches when the foot is replaced.

[1024MAK]

1.) Does anyone know what will get the adhesive from the rubber feet off the plastic case without harming the case?

After pulling off and scraping the old foot off, try IPA solvent cleaner.

2.) Does anyone have a source for replacement feet?

See post above.

Mark

[TMAOne]

In a pinch, WD40 works too.

[msansom]

Thanks guys.

[rmbrowngr]

Does anyone know of a seller of rubber feet in the EU, or know of a brand \ specification of these feet so I can source locally?

[Lardo Boffin]

I use “Solid Neoprene Adhesive Backed Rubber Gasket Sheet”.

Just buy the thickness you want and cut to size.

I get it slightly thicker than the standard feet as I fit a Wespi switch underneath (coming out between the cooling grill slats) the zeddy when refurbing.

[rmbrowngr]

I use “Solid Neoprene Adhesive Backed Rubber Gasket Sheet”.

Thanks