Page 3 of 12
Re: ZEDDYNET
Posted: Tue Nov 24, 2015 8:48 pm
by questarian
Once again, I'm late to the party...
I'm interested in one from the next batch if possible.
Thanks!
-John E. Bielak-
ZEDDYNET
Posted: Tue Dec 01, 2015 9:29 pm
by Paul
The PCBs have arrived in Germany (not at my place yet).
This is what it looks like:
- 2015.jpg (530.57 KiB) Viewed 4117 times
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 11:21 am
by XorA
Ooooh shineys!
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 11:53 am
by tdg8934
I know it's s long shot but I'll ask anyway...this weekend I'm flying for business for the next 2.5 weeks into Stuttgart Germany where I'll stay in Hechingen. Any chance of driving over (if close enough) to pick one up over some weekend?
Tim
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 1:38 pm
by Paul
tdg8934 wrote:I know it's s long shot but I'll ask anyway...this weekend I'm flying for business for the next 2.5 weeks into Stuttgart Germany where I'll stay in Hechingen. Any chance of driving over (if close enough) to pick one up over some weekend?
Tim
It's about 500km from my home. Near 52525 Heinsberg.
If you would like to come over you are welcome.
kind regards Paul
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 1:54 pm
by tdg8934
Thanks Paul but that's about 5 hours drive each way. I'll wait for the postal mail.
Thanks again!
Tim
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 3:00 pm
by Paul
With my Sinclair C5 it would take much longer. I have to recharge every 30 km
Re: ZEDDYNET
Posted: Wed Dec 02, 2015 4:55 pm
by Andy Rea
Hi Paul,
Board look good, i guess i ought to send you sooner money ! How I'd the best way to do it?
Regards Andy
Re: ZEDDYNET
Posted: Thu Dec 03, 2015 1:39 pm
by Paul
Here is a picture of a new built Zeddynet card:
- Aufgebaut.jpg (413.63 KiB) Viewed 4048 times
Everything is working as expected.
The Zeddynet Card is plugged into one of Pokémon's 81xtender Cards.
The next batch of boards have been ordered.
I will PN you shortly about the options you have for ordering from me including payment details.
Kind regards
Paul
Re: ZEDDYNET
Posted: Thu Dec 03, 2015 3:00 pm
by Paul
I have calculated the options:
A) PCB only plus programmed GAL:
9,50£ including postage
B) Kit 18,50£ including postage
the Kit contains all neccessary parts including what is needed for Pokemon 81xtender. It excludes the WIZ812MJ module.
C) Soldered and tested 25£ including postage. It excludes the WIZ812MJ module.
In any way you will need a WIZ812MJ module as well.
Just as an example it's available at TME
http://WWW.TME.EU