Keyboard Repair

Discussions about Sinclair ZX80 and ZX81 Hardware
bola_dor
Posts: 286
Joined: Wed Oct 02, 2019 5:32 am

Re: Keyboard Repair

Post by bola_dor »

Wow.. thats a piece of work.. :o
Why didn't you use the conectors you ha e desoldered from the board to attach to the ribbon /membrane?
Ernesto
ZX80, TK83, CZ1000, CZ1500, TK85, CZ2000, CZ1000Plus, CZ Spectrum, TK90X 16Kb, CZ Spectrum Plus, TS2068, Sinclair QL. TS 1016, TS1040. And more to come :D
jsweinrich
Posts: 16
Joined: Mon May 31, 2021 6:22 pm

Re: Keyboard Repair

Post by jsweinrich »

The silver plating on the keyboard flex cable is very fragile, a couple of in/out of the original connectors and the plating would be ruined. My guess, the original flex cable ends were plated with a thick layer of copper... But, I'm sure there are many other variation on this theme.
Post Reply