ZX81 ULA-in-a-CPLD

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
McKlaud
Posts: 337
Joined: Tue Dec 19, 2017 10:02 pm
Location: St Albans, UK

Re: ZX81 ULA-in-a-CPLD

Post by McKlaud »

:D Andy, nice features :D
Claudius
----------
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 ULA-in-a-CPLD

Post by Andy Rea »

little update second prototype PCB arrived and i have built one up, a little tweaking with the tape inout circuit and all is well.
top side:
Image
bottom side ( still ocvered in flux :o )
Image

tape input works reliably with my Timex branded cassette player i can load programs with volume between 5 and 7... with a " perfect source " OTLA found here https://code.google.com/archive/p/otla/ i can load 3D monster maze in as little as 9 seconds, with windows volume anywhere from 50% to 90% OTLA works surprisingly well.

The 2 other proto boards will be built ( and cleaned ) in the next few days and after testing, a couple of lucky forum members will be gifted these boards for further testing / evaluation / end user experience blah blah....

If all goes well i will order a larger quantity of boards and get building.

Regards andy
what's that Smell.... smells like fresh flux and solder fumes...
Lardo Boffin
Posts: 2160
Joined: Sat Nov 26, 2016 2:42 am

Re: ZX81 ULA-in-a-CPLD

Post by Lardo Boffin »

Andy Rea wrote: Wed May 16, 2018 9:46 pm
If all goes well i will order a larger quantity of boards and get building.

Regards andy
:o :shock: 8-) :D

I couldn’t see an ‘excited’ smiley.
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
McKlaud
Posts: 337
Joined: Tue Dec 19, 2017 10:02 pm
Location: St Albans, UK

Re: ZX81 ULA-in-a-CPLD

Post by McKlaud »

I am impressed with your progress, Andy. Well done and the board looks stunning. :geek: :geek:
Claudius
----------
User avatar
1024MAK
Posts: 5103
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ZX81 ULA-in-a-CPLD

Post by 1024MAK »

IMG_7073.JPG
IMG_7073.JPG (26.73 KiB) Viewed 5666 times
He drooled uncontrolledly as he typed the message...

Lovely work there, well done Andy 8-) :D

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
Moggy
Posts: 3231
Joined: Wed Jun 18, 2008 2:00 pm

Re: ZX81 ULA-in-a-CPLD

Post by Moggy »

Looks good,Andy and it also means longevity for our zeddies as it will replace this most important yet obsolete component. :ugeek:
nollkolltroll
Posts: 325
Joined: Sat Sep 27, 2014 8:02 pm
Location: Stockholm, Sweden

Re: ZX81 ULA-in-a-CPLD

Post by nollkolltroll »

Very nice to have some proper replacement for our aging HW.
Any plans for further functions, like a super ULA?
/Adam
User avatar
TMAOne
Posts: 212
Joined: Thu Aug 16, 2012 6:56 pm
Location: Waterloo, Ontario, Canada

Re: ZX81 ULA-in-a-CPLD

Post by TMAOne »

Congratulations Andy!

This is truly a milestone in Zeddy history, as I know many otherwise good examples have gone to the dumpster for lack of a replacement ULA.

Good going. I look forward to them being widely available.
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 ULA-in-a-CPLD

Post by Andy Rea »

built the other 2 this evening and after testing both worked as expected, i then tried one inside a real zx81 case... oh my :geek: the link in the middle is mighty close to touching the case ... the easiest thing would be to fit a right angle header. (might have to bend it up slightly :? ) the link is there to add a 75 ohm load should you be unlucky :lol: enough to own a monitor / tv that has a high impedance input.....

On second thoughts looking at the picture again i could just lose the plastic bit on the bottom of the pins so when fitted the shorting link would sit on the PCB. that would easily provide more than enough clearance.

Image

isnt it funny how the colour of the caps change with the angle... c1, c5, c6 ,c9 are all the same ( from the same strip )

Image

the eagle eyed may notice that pin 35 does not have a SIL pin in it, this is now an input that can be left unconnected for standard operation or grounded to enable M1NOT operation.

so erm yeah.... thats it for now....
nollkolltroll wrote: Thu May 17, 2018 1:17 pm Very nice to have some proper replacement for our aging HW.
Any plans for further functions, like a super ULA?
Not at this time other than M1NOT and that happened as an afterthought and then only because i am using on board oscillator so have a pin free.

Regards Andy
Last edited by Andy Rea on Tue May 29, 2018 7:21 pm, edited 1 time in total.
what's that Smell.... smells like fresh flux and solder fumes...
McKlaud
Posts: 337
Joined: Tue Dec 19, 2017 10:02 pm
Location: St Albans, UK

Re: ZX81 ULA-in-a-CPLD

Post by McKlaud »

Image
Claudius
----------
Post Reply