A scanner for you Zx81/Specturm.[WIP/DIY]

[XavSnap]

For the AMSTRAD CPC 464/6128: (using a photodiode BWP 21 Telefunkel or a photoresistor = 2 colors)

http://abandon.pcbs.free.fr/mageco.htm

[XavSnap]

AMSTRAD CPC 464/6128 analog card:

GERBER/Kicad 6 project (NOT TESTED):
http://abandon.pcbs.free.fr/mageco.htm

[XavSnap]

ATARI ST Card (article's PCB):

Kicad v.6 & Gerber files:

PCB_ATARI_ST.zip

(906.38 KiB) Downloaded 136 times

Note:
In the article, the component's side in the top view is false.
The photo gave the right component side.

[XavSnap]

The sound of a picture challenge:

Simply link the resistor output on a cheap PC USB sound card (2$) to avoid burning the main inboard sound card...
The positive or negative low frequency signals can destroy the sound card !
The voltage had to be less than 5v to avoid to saturate the sound card recorder.
Don't bother the synchro connection.

Save your picture in WAV 16bits/44khz format, and post this zipped wav file on this tread/on a temporary host server.

Who will guess what the photo represents?

[XavSnap]

Motor speed:
Cylinder max speed turn around 1 rotation per second.
The speed variator can reduce this speed at -1/4= 0.75 rotation per second.
1RPS(Second) =60RPM(Minute)

Cylinder to the motor:
40touth/8tooth= 5 multiplier.

Motor to the cylinder:
8tooth/40touth= 0.2 multiplier.


60RPM x 5= 300 RPM

300 RPM x 0.2 =60 RPM= 1 RPS on the cylinder axe=1 RPS on the head moving axe.

Motor spec.: MOTOR DC 300RPM 3v. (1.5vx2 battery)

GA12-N20 DC 3V 6V 12V Micro Metal Gear Motor Gear Wheel Gear Motor 30RPM 50RPM 60RPM 100RPM 150RPM 200RPM 300RPM 600RPM 1000RPM

8 tooth gear hole 5mm with shaft key: (STL & Winds3D)

8teeth_gear_h5mm_B.zip

(486.5 KiB) Downloaded 122 times