Was just thinking about squeezing a joystick pork inside a zx81. Taping the 5 6 7 8 and 0 keys should be possible with some careful soldering to the keyboard membrane sockets on the board. Tried it yet anyone?
I thing the tophalf of the membrane leads to one socket the bottom half to the other..
How to Build a keystick port internally to zx81
Re: How to Build a keystick port internally to zx81
Connecting a joystick directly to the keyboard lines will overload the Z80 addressbus (driving the keyboard lines), because the capacitive load of the long cable to the external joystick is too high.
At least some additional components (transistors or driver ICs) are necessary to drive this long cable.
HTH Siggi
At least some additional components (transistors or driver ICs) are necessary to drive this long cable.
HTH Siggi
My ZX81 web-server: online since 2007, running since dec. 2020 using ZeddyNet hardware
http://zx81.ddns.net/ZxTeaM
http://zx81.ddns.net/ZxTeaM
Re: How to Build a keystick port internally to zx81
Or you could get a JoyKey from the German forum.
This needs an external keyboard buffer like Wilf Rigter’s BKBv3 or German team’s keyboard pcb.
http://forum.tlienhard.com/phpBB3/viewt ... f=2&t=2776
http://www.user.dccnet.com/wrigter/inde ... XKBDv3.htm
This needs an external keyboard buffer like Wilf Rigter’s BKBv3 or German team’s keyboard pcb.
http://forum.tlienhard.com/phpBB3/viewt ... f=2&t=2776
http://www.user.dccnet.com/wrigter/inde ... XKBDv3.htm
Re: How to Build a keystick port internally to zx81
Thanks for feedback appreciated
Re: How to Build a keystick port internally to zx81
I once had such a thing with at least 1 meter of cable and a connector on the 81. I may have been quite naive, but it worked.
Re: How to Build a keystick port internally to zx81
I should have noted, that this used no commercial joystick, but microswitches connected to the lines for the cursor keys.