ZX8-KDLX - replacement keyboard for ZX81 with SMD switches

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
Post Reply
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

ZX8-KDLX - replacement keyboard for ZX81 with SMD switches

Post by PokeMon »

A few month ago I developed a pcb to realize a keyboard for a ZX81 which can be easily used as a replacement keyboard as well instead of a simple membrane.
The reason for development was mainly for a ZX81 replica from the german user holmatic which is called ZX81NU with pure discrete logic instead of a ULA.
Many people like a more comfortable keyboard feeling while typing and so the idea was born to build up a keyboard (initiated from german Paul).

So this keyboard can replace any ZX81 membrane while simply putting it on top of the old membrane - so it is fully reversable to keep the original state of a ZX81.


the board itself - smaller in thickness, just 0.8mm instead of the standard 1.6mm, so half in height
IMG_8013kk.JPG
IMG_8013kk.JPG (102.93 KiB) Viewed 8994 times

assembled here with the ALPS SKQGAFE010 tactile switches with low profile (1.5mm) and MOLEX jumper cables to easily connect the replacement keyboard to the MOLEX connectors on the ZX81, the jumper cables (type 25001) are flat cables with a half-solid core (drilled and soldered wires on the full length) which give both, flexibility and rigidity
IMG_8021kk.JPG
IMG_8021kk.JPG (141.24 KiB) Viewed 8994 times

the jumper cables are passing the hole in the case quite comfortable and the old membrane can be left there or removed - up to you
IMG_8025kk.JPG
IMG_8025kk.JPG (117.94 KiB) Viewed 8994 times
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switch

Post by PokeMon »

the height of the complete replacement keyboard is about 2.5 mm or 1/10 inches and this doesn't harm optically when placed on top of the membrane or case
IMG_8028kk.JPG
IMG_8028kk.JPG (98.73 KiB) Viewed 8993 times


the rigid ends of the cable jumper can be feeded easily into the board (with some care to hold it straight while pushing it into the plug)
the contacts are not wided too much so when removed the thinner membranes will hold as well again
IMG_8032kk.JPG
IMG_8032kk.JPG (93.16 KiB) Viewed 8993 times
IMG_8033kk.JPG
IMG_8033kk.JPG (91.9 KiB) Viewed 8993 times
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switch

Post by PokeMon »

The cables are flexible enough to bend them in a small curve to fit under the board:
IMG_8035kk.JPG
IMG_8035kk.JPG (92.56 KiB) Viewed 8992 times

Here is a variant using pin headers (to the ZX81NU):
IMG_7834kks.jpg
IMG_7834kks.jpg (58.51 KiB) Viewed 8992 times


and there is a variant with ZX80 top cover instead of ZX81 layout available as well, just in case:
IMG_8018kk.JPG
IMG_8018kk.JPG (91.1 KiB) Viewed 8992 times
Last edited by PokeMon on Sun Oct 12, 2014 1:32 pm, edited 1 time in total.
RWAP
Posts: 1348
Joined: Thu May 08, 2008 8:42 am
Location: Stoke-on-Trent, UK
Contact:

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switch

Post by RWAP »

That looks excellent - the one thing I would warn about is the graphics for the overlay, as some of the ones on the web have minor errors....
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switch

Post by PokeMon »

RWAP wrote:That looks excellent - the one thing I would warn about is the graphics for the overlay, as some of the ones on the web have minor errors....
I did check this carefully with my own original ZX81 and they have not been copied from the web but created manually new by hand.
By the way - the membrane contains also the ZXpand tokens DELETE, CONFIG and CAT.




The solution ZX8-KDLX is available as board only, assembly kit and complete "manufactured" keyboard - so easily to use for everyone on sellmyretro:

http://www.sellmyretro.com/user/profile/PokeMon


And ZX Spectrum (16/48k) keyboards are available soon as well as they are used for the german Harlequin users ...
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switch

Post by sirmorris »

Brilliant! Superb work as always, Karl :D
juzzo72
Posts: 13
Joined: Sun Sep 12, 2021 9:46 pm

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switches

Post by juzzo72 »

It is still fit sales?
User avatar
1024MAK
Posts: 5101
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ZX8-KDLX - replacement keyboard for ZX81 with SMD switches

Post by 1024MAK »

PokeMon does not currently have any active listings on Sell My Retro :(

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Looking forward to summer later in the year.
Post Reply