Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
PokeMon
Posts: 2264 Joined: Sat Sep 17, 2011 6:48 pm
Post
by PokeMon Sun Jun 22, 2014 11:16 pm
but missed something.
guess what ?!
sure, the NMI board
IMG_7756kk.JPG (136.78 KiB) Viewed 5087 times
but easy to fix because it is a service-friendly case
IMG_7760kk.JPG (159.78 KiB) Viewed 5087 times
doesn't look like but fits exactly in that corner
IMG_7765kk.JPG (153.14 KiB) Viewed 5087 times
and DONE !
1024MAK
Posts: 5534 Joined: Mon Sep 26, 2011 10:56 amLocation: Looking forward to summer in Somerset, UK...
Contact:
Post
by 1024MAK Mon Jun 23, 2014 12:36 am
poglad
Posts: 133 Joined: Mon Mar 24, 2014 3:11 pmLocation: Aberdeen, Scotland
Post
by poglad Mon Jun 23, 2014 11:37 am
Superb!
balford
Posts: 104 Joined: Tue Dec 03, 2013 11:20 pmLocation: Dublin, Ireland
Post
by balford Thu Jun 26, 2014 8:31 pm
One very satisfied customer here
B
poglad
Posts: 133 Joined: Mon Mar 24, 2014 3:11 pmLocation: Aberdeen, Scotland
Post
by poglad Thu Jun 26, 2014 10:16 pm
And another! My album of this adventure is now complete!
https://www.flickr.com/photos/51900952@ ... 628673844#
14513249454_f16c4ac91e_o.jpg (164.77 KiB) Viewed 5013 times
I put a label on the back to show the switch positions, but I made it very slightly too wide - so you can see little white strips peeping out under the keyboard! Oh well!
14327998640_efd098f76a_o.jpg (103.49 KiB) Viewed 5013 times
PokeMon
Posts: 2264 Joined: Sat Sep 17, 2011 6:48 pm
Post
by PokeMon Fri Jun 27, 2014 10:39 pm
Nice to see - thanks for sharing the pics.
Prime
Posts: 134 Joined: Thu Mar 24, 2011 3:02 am
Post
by Prime Mon Jul 14, 2014 10:43 am
PokeMon,
XorA
Posts: 98 Joined: Thu May 10, 2012 9:14 amLocation: Glasgow, Scotland, UK
Contact:
Post
by XorA Thu Jul 17, 2014 2:42 pm
I finally got a chance to assemble my case, absolutely fantastic.
I did make a mistake assembling it and miscounted the number of spacers, so there are two under the keyboard area and one missing from left hand side of keyboard. Had to use an m3 nut of approx same height instead
(this must be the only time superglue has ever worked as advertised for me)
PokeMon
Posts: 2264 Joined: Sat Sep 17, 2011 6:48 pm
Post
by PokeMon Sun Jul 20, 2014 11:31 pm
Prime wrote: PokeMon,
Yes - shortly will put it online at sellmyretro in the next 2 or 3 days ...
Standby alert 
