New prototype ZX-deluxe+

Any discussions related to the creation of new hardware or software for the ZX80 or ZX81
ahlmann
Posts: 2
Joined: Thu Oct 07, 2021 7:38 am

Re: New prototype ZX-deluxe+

Post by ahlmann »

When and where will this kit be available? 😋
zxhenk
Posts: 16
Joined: Tue May 05, 2020 11:32 am

Re: New prototype ZX-deluxe+

Post by zxhenk »

Well I have finshed the whole design and have a definite PCB, even wrote a manual for this computer but there was not much interest in this kit. To get out of all the costs made during the making of this computer I have to sell at least 10 of these kits for around € 200-220 Euro but I don't think there will be that much interest as I see there are very few responses on this thread. So I only made one for myself :D
User avatar
Paul
Posts: 1167
Joined: Thu May 27, 2010 8:15 am
Location: Germanys west end

Re: New prototype ZX-deluxe+

Post by Paul »

The interest in this board died at the moment you stated you were only selling expensive kits or even more expensive ready built units.
While I can understand that you would like to get financial return on your investment this is not the way this community works.
I guess you have some PCBs left as single boards are not commonly produced, refusing to sell them at price a little above your producing cost of your board will not make your project any more profitable.
Just my few cents.
In theory, there is no difference between theory and practice. But, in practice, there is.
ahlmann
Posts: 2
Joined: Thu Oct 07, 2021 7:38 am

Re: New prototype ZX-deluxe+

Post by ahlmann »

I will pay the 200 eu for a kit.. plz contact me on ahlmannkim@gmail.com


Cheers
McKlaud
Posts: 318
Joined: Tue Dec 19, 2017 10:02 pm
Location: St Albans, UK

Re: New prototype ZX-deluxe+

Post by McKlaud »

zxhenk wrote: Thu Oct 07, 2021 1:04 pm ... I have to sell at least 10 of these kits for around € 200-220 Euro ..
200 Euro each or 200 Euro for 10? :mrgreen:
Claudius
----------
Spinnetti
Posts: 102
Joined: Sat Sep 12, 2020 11:29 pm

Re: New prototype ZX-deluxe+

Post by Spinnetti »

I think its a really neat project, but price point and no case make it kinda problematic. I'd love to see that board inside a TS1500 case with the rubber chicklet keys for instance.
Sinclair AM mini radio
TS1000/Composite
TS1500/Composite
TS2068/Stock
Spectrum 48k/Composite
Spectrum+/Composite
Interface 1 & Microdrives + Speccy Vdrive
QL/Minerva w/TKII/Custom PSU/QL-VGA
Post Reply