Page 1 of 1
AY Extended BASIC
Posted: Tue Mar 27, 2018 7:34 pm
by GCHarder
Wasn't sure if I should put this here or in the Software forum. I've been working on this for awhile now.
Originated from this article...
SOUND FOR THE ZX81
R. Bruneaus, Sept. 1994
Sinc-Link Vol. 12 No. 4
Modified for use with ZXPAND+.
Includes demos, a couple simple games and tunes.
I've tested all programs on a T/S 1000 with a ZXPand+ interface.
PAL systems will naturally RUN faster.
Regards;
Greg
- Tune Menu
- Tunes Menu.gif (8.27 KiB) Viewed 7837 times
- Sound FX Menu
- SFX Menu.gif (8.21 KiB) Viewed 7837 times
Re: AY Extended BASIC
Posted: Tue Mar 27, 2018 9:53 pm
by sirmorris
This looks very interesting - thanks Greg! Sound programs are thin on the ground ... for now
Re: AY Extended BASIC
Posted: Tue Mar 27, 2018 11:35 pm
by Moggy
THANK YOU THANK YOU THANK YOU........................
Re: AY Extended BASIC
Posted: Wed Mar 28, 2018 12:02 am
by Andy Rea
Great stuff indeed, excellent work as usual, thank you very much .
Andy
Re: AY Extended BASIC
Posted: Sun Apr 29, 2018 4:31 am
by swensont
Greg,
Just curious about what tool you use to convert from .BAS to .P?
Tim
Re: AY Extended BASIC
Posted: Mon Apr 30, 2018 9:55 pm
by GCHarder
swensont wrote: ↑Sun Apr 29, 2018 4:31 am
convert from .BAS to .P?
Xavsnap's emulator VB81 XuR
zx81.vb81.free.fr
Regards;
Greg
Re: AY Extended BASIC
Posted: Tue May 01, 2018 9:57 am
by mrtinb
Re: AY Extended BASIC
Posted: Wed May 02, 2018 11:46 pm
by swensont
So, both emulators will do it automagically?
I use zxtext2p to convert .bas to .p and these use sz81 for emulation. The format of the .bas files for AY Basic are not in a format that zxtext2p uses and I was thinking there was another utility.
Tim
Re: AY Extended BASIC
Posted: Thu May 03, 2018 9:19 pm
by GCHarder
swensont wrote: ↑Wed May 02, 2018 11:46 pm
The format of the .bas files for AY Basic are not in a format that zxtext2p uses and I was thinking there was another utility.
In VB81 Xur...
To LOAD a .bas file, under FILE options just select the .bas file (any plain text file works), it will load.
To save as .p file just SAVE "MyProg"
To load a .p file, under FILE options just select the .p file (tzx also works), it will load.
To save as .txt file just SAVE "MyProg.txt"
I replace the extension with .bas.
See also...
http://www.emutopia.com/index.php/emula ... 9-vb81-xur