Beamrider .p file
Posted: Mon Oct 18, 2021 12:44 am
Does anybody on here have a link to, or even better, a downloadable .p file of Beamrider? All I can send to find are .81 files. Thanks in advance, David
Sinclair ZX80 / ZX81 / Z88 Forums
Discussion forums for users of the Sinclair 8-bit range of computers - ZX80, ZX81, ZX Spectrum, Z88, clones...
https://www.sinclairzxworld.com/
Beamrider .p file
Page 1 of 1
Re: Beamrider .p file
Posted: Mon Oct 18, 2021 1:32 am
.81 and .p files are practically the same. If you change the extension it should work as well...
Re: Beamrider .p file
Posted: Mon Oct 18, 2021 4:22 am
BEAMRIDE.PIts1982again wrote: ↑Mon Oct 18, 2021 12:44 am Does anybody on here have a link to, or even better, a downloadable .p file of Beamrider? All I can send to find are .81 files. Thanks in advance, David
Re: Beamrider .p file
Posted: Mon Oct 18, 2021 4:32 am
PS: If you are using a ZXPand you will need to do this before running Beam Rider...BarryN wrote: ↑Mon Oct 18, 2021 4:22 amBEAMRIDE.PIts1982again wrote: ↑Mon Oct 18, 2021 12:44 am Does anybody on here have a link to, or even better, a downloadable .p file of Beamrider? All I can send to find are .81 files. Thanks in advance, David
Code: Select all
CONFIG "M=H"
Re: Beamrider .p file
Posted: Mon Oct 18, 2021 10:24 am
BarryN wrote: ↑Mon Oct 18, 2021 4:32 amPS: If you are using a ZXPand you will need to do this before running Beam Rider...BarryN wrote: ↑Mon Oct 18, 2021 4:22 amBEAMRIDE.PIts1982again wrote: ↑Mon Oct 18, 2021 12:44 am Does anybody on here have a link to, or even better, a downloadable .p file of Beamrider? All I can send to find are .81 files. Thanks in advance, David
Code: Select all
CONFIG "M=H"
Thanks. I'm on a 32k machine. I've set the Vla81 to 8k - 40k so hopefully it should work.
Re: Beamrider .p file
Posted: Mon Oct 18, 2021 10:26 am
Its1982again wrote: ↑Mon Oct 18, 2021 10:24 amBarryN wrote: ↑Mon Oct 18, 2021 4:32 amPS: If you are using a ZXPand you will need to do this before running Beam Rider...
Code: Select all
CONFIG "M=H"
Thanks. I'm on a 32k machine. I've set the Vla81 to 8k - 40k so hopefully it should work.
Just realized the memory on the zxpand needs to be 16-48k so I'll set mine to that instead!
