Sinclair ZX80 / ZX81 / Z88 Forums

yerzmyey wrote:Hmmm. Doesn't work on Eighty One 1.0.

"Press any key to start" does not work...

Hi Yerzmey

I do all testing on the EO 1.0a but I think the program must work on the 1.0 too.
If there is any problem, then I like to fix it, Can you tell me what is going on when you try to run the program on EO 1.0 ???
Thanks
Gus

XavSnap wrote:Hi Gus,
My blank cover is ... ( in the "Crystal Frog" contest ):D
Have Fun...

Hi Xav !!!

The cassette cover is wonderful, this really likes me
If I can ask you even more I will be happy if we can put some Credits on the back...
I means, I like to put the Credits of the Spectrum Original Version programmer and date, I like to put my name and obviously the cover artist name too.
So if you don't mine I will send you a PM with this info

Thanks
Gus

Hi again,

exactly like I wrote:
"Press any key to start" does not work.

It - You could say - freeze. You press anything but without result. Strange. I liked the 1.0 version the most.

Hi Yerzmyey,

Hi again,

exactly like I wrote:
"Press any key to start" does not work.

It - You could say - freeze. You press anything but without result. Strange. I liked the 1.0 version the most.

Don't worry...
The "Crystal Frog" is Ok.
I Have reported this BIG Freezing to Gus !
And i found this problem...
It's a 32k game... and you had to init the Rampack card (RamTop) !
It seem working with a LOAD"", but it crash !
You had to Reinit the 32k ramtop with :

POKE 16389,255
New
and type LOAD""

Gus Explained this in a previous message...

Note:
You had to type it too, with the XuR, the automatic 32k config. seem to hang too.
Have Fun.

Oh, I didn't know that 32k RamPack requires re-inite. Most interesting.
Thanx a lot!
Y


________EDIT_________
No, it doesn't work sadly. I can see only moving garbage on the screen. :-\
Ah well, don't worry. I don't wanna bother You guyz.

yerzmyey wrote: No, it doesn't work sadly. I can see only moving garbage on the screen. :-\
Ah well, don't worry. I don't wanna bother You guyz.

Hi
This enjoy me
Please in EO select a TK85 machine with 32K Ram, this way you do not need to change the RAMTOP manually
Gus

Ha. The same. (This one with LOAD "" only).
Moving trash on the screen. After I press any key - the screen goes white.
The end.
Hmmmmm.

Hi yerzmyey,

You have to uncheck the option "enable M1Not circuit" on "Options/Hardware/Advanced Setings".

M1Not and Dfile above 32K are mutually exclusive

Hi ,
The Wav generated by VB81 (From the Otla project).

Have Fun.

Hi,

Need Help ???

Have Fun.