Page 1 of 2
Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sat Mar 29, 2025 3:22 am
by Crayon21
how do I fix this? It won't respond to anything and I often have to redo type ins due to having to reset. any help? I'm running windows 10 build: 19045
latest install: KB5053606
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sat Mar 29, 2025 9:51 am
by Moggy
Unless you're running a desktop/tower PC along with a cathode tube TV/monitor, screensavers are unnecessary so the simple answer is to disable the screensaver.
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sat Mar 29, 2025 11:12 am
by 1024MAK
I haven’t used a "screen saver" on a modern PC since, err, ever! Yes, I had a screen saver on my Pentium system that ran Windows Windows 95.
On my newest laptop, which is running Windows 10 (version 10.0.19045 build 19045) there is no problem with it going into and out of standby or hibernation.
Mark
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sat Mar 29, 2025 3:36 pm
by stroebeljc
Which screensaver?
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sun Mar 30, 2025 1:13 am
by Crayon21
stroebeljc wrote: ↑Sat Mar 29, 2025 3:36 pm
Which screensaver?
when I leave it idle, it goes to my password screen and shuts off the monitor
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sun Mar 30, 2025 10:10 pm
by Exile
I can reproduce this very easily on Windows 10.
With EO 1.4.1 I created a simple program
When the code was running I pressed control-alt-delete and selected the lock screen (aka password screen). I then entered my password to exit the lock screen. When my desktop was redrawn EO had crashed - the attached screen shot shows the error dialog box.
Sometimes after clicking "OK" a few times the dialog went away. At that point EO displayed the following:
The fact that the program ran until the screen was full makes me think that the crash occurs when the PC leaves the lock screen, rather than when the PC enters the lock screen
I got a similar crash when I tried with EO 1.40.
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Sun Mar 30, 2025 10:43 pm
by stroebeljc
I am unable to reproduce the issue on my Windows 10 PC with the KB5053606 update. Has this issue always been present on Windows 10, or has it only occurred since the latest Windows update?
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Mon Mar 31, 2025 1:18 am
by 1024MAK
The version of EightOne that I am using is 1.38
This is running on Windows 10 (version 10.0.19045 build 19045) 22H2 KB5053606.
I have noticed that if I run this program:
Code: Select all
10 FOR A=1 TO (21*32)
20 PRINT "*";
30 NEXT A
40 CLS
50 GOTO 10
Then go to the lock screen as described by Exile, then when I unlocked, EightOne continued running.
After breaking into the program by pressing Space, pressing Return (New Line) just alternates between a K cursor and a F cursor. Unless I use a letter key or press Space again, then Return (New Line) works as normal.
I'll try using EightOne 1.41 later.
Mark
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Mon Mar 31, 2025 6:53 pm
by 1024MAK
1024MAK wrote: ↑Mon Mar 31, 2025 1:18 am
I'll try using EightOne 1.41 later.
I get similar results with EightOne 1.41 except the keyboard behaviour is worse. After getting the cursor changing as I describe above, pressing space gets me £ symbols instead...
Mark
Re: Eightyone freezes whenever my Pc goes into screensaver mode
Posted: Mon Mar 31, 2025 7:39 pm
by stroebeljc
1024MAK wrote: ↑Mon Mar 31, 2025 6:53 pm
I get similar results with EightOne 1.41 except the keyboard behaviour is worse. After getting the cursor changing as I describe above, pressing space gets me £ symbols instead...
It's acting like the shift key is pressed. Does pressing one of the shift keys before any other key fix the problem?