[Vb81] Test release.

Emulator and emulator development specific topics
User avatar
XavSnap
Posts: 898
Joined: Sat May 10, 2008 4:23 pm

Re: [Vb81] Test release.

Post by XavSnap »

:ugeek:

Thanks GCHarder !

Another bug, another place…
To get a wrong command, i scan the line to get all commands tokens to check this error.

But, in case of "IF/THEN" command, i had to test it again.
But, in the floating code '16623', there is ...DE… (222=THEN CODE)… the next token is "00" … Something's wrong !

You are Lucky Greg !!!
:lol:

Thanks.
Capture_vb.JPG
Xavier

User avatar
GCHarder
Posts: 253
Joined: Sat Dec 14, 2013 7:46 pm

Re: [Vb81] Disassembler Window

Post by GCHarder »

If not too hard would it be possible to make the disassembler window resizable? I find it a bit constricting, especially when the contents of the registers
are being shown. I'd also like to see wider columns, these are sizable, but restricted because of the size of the main window.

Just a suggestion.

Regards;

Greg

User avatar
XavSnap
Posts: 898
Joined: Sat May 10, 2008 4:23 pm

Re: [Vb81] Test release.

Post by XavSnap »

Hi Greg,

I will have a look as soon as possible !
:D

Thanks !
Xavier

User avatar
XavSnap
Posts: 898
Joined: Sat May 10, 2008 4:23 pm

Re: [Vb81] Test release.

Post by XavSnap »

Release 26/11/2019 ready.
Have fun.

Xavier.
Xavier

bola_dor
Posts: 141
Joined: Wed Oct 02, 2019 5:32 am

Re: [Vb81] Test release.

Post by bola_dor »

I gave it a try. Looks good with losts of tools.. :D
CPU load is similar to EO. But when I checked it first time SETUP. EXE (dll image installer?) was still running eating as much as 50% CPU.. I just closed it an I don't know if this is a repetitive issue on install :|
Typing is snappier!! :D
I miss some more border on the display ;)
I couldn't load some .P files :?
Whit a :
CASE CLOSED
PRESS S
Is this WRX HR compatible? I tried with 1K HRG with no success.. how should I configure it?
Looks good over all

User avatar
XavSnap
Posts: 898
Joined: Sat May 10, 2008 4:23 pm

Re: [Vb81] Test release.

Post by XavSnap »

:lol:

this is a repetitive issue on install :|
Just a double double click on the icon.
It's a DLL installer, and if the vb81_xur.exe is running … it' done !

I couldn't load some .P files
Yes, most of 1k P files can't be launch on emulator or real computer, du to the screen deflating mode in 1-2 and 16kb ram pack.
Some of 1k programs in ASM can hang too, most of memory/card setup not allow the minimum ram config.

Is this WRX HR compatible? I tried with 1K HRG with no success.. how should I configure it?
No… the WRX based on the real screen scan routine are bypassed by the emulator.
Only the HR cards (Memortech/G007/Quick Silva) included in the setup menu are support.

GR.JPG

In the first VB81 release, the "RocketMan" and "HR minor" are supported, but never test them in the recent release.
I used to launch the excellent EO to display software HRG and sZ81 to use sound devices.
Xavier

Post Reply