Hi
Been lurking in for a bit, trying to get my old 81 working again.
Built from the kit, bought with the earnings from a summer job (well, a bit of the earnings).
It's not quite right yet so will post in the appropriate for a bit of help please.
Regards,
Dave
Hello
Re: Hello
Lurk at will!
5-TS1000,UK ZX81<-Sheelagh, US ZX81, 2-TS1500/KDLX , 3-TS2040 printer, 2-TS2020 cassette decks, ZXPAND+AY, ZeddyNET, ZXBlast, UDG, ZX8CCB, AERCO, BUILDS/REPAIRS ZX Spectrum, ZX80 Minstrel, ZXMAX48 v1 v2, 2-TS-2068, ROM, 16kRAM
- 1024MAK
- Posts: 5118
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: Hello
Welcome on board Dave!
Welcome to Sinclair ZX World
Tucked away here there is lot of information about the ZX81 and it’s siblings
So have a good root around
If you can’t find what you need, please do POKE us by asking a question. We may even switch to FAST mode
Mark
Welcome to Sinclair ZX World
Tucked away here there is lot of information about the ZX81 and it’s siblings
So have a good root around
If you can’t find what you need, please do POKE us by asking a question. We may even switch to FAST mode
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.