Yoooo I just tried it out and it works! Thank you so much!
The wires are kinda loose though, is there a better way to attach them?
Eran
Can't get a display output with my ZX Spetrum 128k+2 (Grey) model
- EranStockdale
- Posts: 16
- Joined: Wed Dec 20, 2023 3:51 pm
- Location: Suffolk, United Kingdom
- Contact:
Re: Can't get a display output with my ZX Spetrum 128k+2 (Grey) model
Harris Hawks for life!
- 1024MAK
- Posts: 5119
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: Can't get a display output with my ZX Spetrum 128k+2 (Grey) model
Well, using a 8 pin DIN socket is a good idea
Like this one on eBay.
They are also available elsewhere.
Carefully solder the wires on. Keep in mind that you have to be quick, otherwise the plastic gets too hot and the pin will go out of line and go wonky. I also recommend using some sleeving, such as heatshrink to prevent short circuits.
Here's a link to a kit of various sizes of heatshrink.
Mark
Like this one on eBay.
They are also available elsewhere.
Carefully solder the wires on. Keep in mind that you have to be quick, otherwise the plastic gets too hot and the pin will go out of line and go wonky. I also recommend using some sleeving, such as heatshrink to prevent short circuits.
Here's a link to a kit of various sizes of heatshrink.
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
- EranStockdale
- Posts: 16
- Joined: Wed Dec 20, 2023 3:51 pm
- Location: Suffolk, United Kingdom
- Contact:
Re: Can't get a display output with my ZX Spetrum 128k+2 (Grey) model
Amazing, thank you! I've just ordered one of those DIN plugs and will probably order some heat shrink tomorrow (I think I might have some somewhere, or know someone who'll have some) I'm thinking of soldering some wires to give some extra length too, do the wires I use need to be of any specific strength?
Eran
Eran
Harris Hawks for life!