Hi all
I recently acquired a Quickshot joystick which doesnt’t shoot. Well, it did for a few minutes and then gave up.
I opened it up and we have this (yes it needs a clean...):-
It looks like pressing fire pushes the what looks like plastic sheets down onto the contact which makes a circuit. You can see the two sheets sat on the main body. They both have holes in them from years of use. They also both feel like crinkly sellotape!
Is there anything I can replace them with? My current plan is to stick some tape on top of them and see what happens...
Thanks
Lardo
Quickshot joystick not shooting
-
- Posts: 2179
- Joined: Sat Nov 26, 2016 2:42 am
Quickshot joystick not shooting
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
-
- Posts: 2179
- Joined: Sat Nov 26, 2016 2:42 am
Re: Quickshot joystick not shooting
Well, one mystery solved. I found a little metal dome rattling around in the case. Clearly the tape was to hold it in place. Shame there are not two as there are two buttons.
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
- 1024MAK
- Posts: 5131
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: Quickshot joystick not shooting
Yes, I killed multiple Quickshot joysticks back in the day...
And yes, many cheap joysticks back then used a metal "click" disc contact mounted on a PCB with "thick" transparent adhesive tape.
Use a suitable solvent cleaner to remove all traces of the glue from the old tape. Put the metal disc on a flat surface and check it clicks if you press it. Using new strong transparent adhesive tape, refit the metal disc contact back on the PCB. Test, then re-assemble.
Mark
And yes, many cheap joysticks back then used a metal "click" disc contact mounted on a PCB with "thick" transparent adhesive tape.
Use a suitable solvent cleaner to remove all traces of the glue from the old tape. Put the metal disc on a flat surface and check it clicks if you press it. Using new strong transparent adhesive tape, refit the metal disc contact back on the PCB. Test, then re-assemble.
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
-
- Posts: 2179
- Joined: Sat Nov 26, 2016 2:42 am
Re: Quickshot joystick not shooting
I did that and it worked for three or four clocks before dying again. The dome is still in place. I even tried making the connections directly and got no response.
I opened up the body and it is a mess of frayed and nearly broken wires in there! Looks like a major tidy up is required. Job for another day...
I opened up the body and it is a mess of frayed and nearly broken wires in there! Looks like a major tidy up is required. Job for another day...
ZX80
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA
ZX81 iss 1 (bugged ROM, kludge fix, normal, rebuilt)
TS 1000 iss 3, ZXPand AY and +, ZX8-CCB, ZX-KDLX & ChromaSCART
Tatung 81 + Wespi
TS 1500 & 2000
Spectrum 16k (iss 1 s/n 862)
Spectrum 48ks plus a DIVMMC future and SPECTRA