![Confused :?](./images/smilies/icon_e_confused.gif)
Guys I am desperate to get the DIVMMCx2 to work. I bought this from 8BITS4EVER and followed the installation guide.
I have set the jumper to 1 for the ZX Spectrum 48K. I have then a 256MB SD card in FAT32 format where I copy all the needed folders in the root directory
/BIN
/SYS
/TAPE48K
/TAPE128K
/Util
etc..
When turning on the Spectrum ZX I can briefly see the ESXDOS booting screen the back to the ZX Spectrum prompt screen. Pushing the NMI button on the DIVMMC will just load a garbled screen as in attachments.
If someone knows where I am wrong before claiming for a replacement?
My ZX spectrum is fully working, tested also with an old cassette deck and a bunch of old games on tape and they will load successfully. Never tested the expansion port though this is the first time a peripheral is connected to it.
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
Do not pay attention to the wrong colors on screen, this is an issue with the composite input of my LCD screen.