Hi guys. While loading a game on my toastrack the loading noise stopped half way through.
Now it is not loading from the ear jack at all. Seems to have gone deaf. Anybody any ideas?
Deaf Toastrack
-
1024MAK
- Posts: 5118
- Joined: Mon Sep 26, 2011 10:56 am
- Location: Looking forward to summer in Somerset, UK...
Re: Deaf Toastrack
What device were you using to generate the audio/“tape” signal?
What cable are you using? Does it have mono or stereo 3.5mm jack plugs?
When trying to LOAD, is there any loading sound (is it quieter than before) or do you now get no loading sound?
Can you still hear the key click sound?
In BASIC, you can also use the BEEP command to make a sound. Does this work?
Do you have any other ZX Spectrums, do they load using the same set-up.
Mark
What cable are you using? Does it have mono or stereo 3.5mm jack plugs?
When trying to LOAD, is there any loading sound (is it quieter than before) or do you now get no loading sound?
Can you still hear the key click sound?
In BASIC, you can also use the BEEP command to make a sound. Does this work?
Do you have any other ZX Spectrums, do they load using the same set-up.
Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
ZX81 Chip Pin-outs
ZX81 Video Transistor Buffer Amp
Standby alert There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb
Looking forward to summer later in the year.
-
marksmithrun
- Posts: 12
- Joined: Fri Aug 19, 2022 9:25 pm
Re: Deaf Toastrack
Hi. Have tried with tape decks and android audio. Tried different cables still no joy