Page 1 of 2
Help wanted
Posted: Tue Mar 13, 2018 12:41 am
by Bill H
Hi all, not sure if you remember me from the TS1000.us days but am hoping one of you can give me a hand. I am looking for something that used to be on the site, you can see the link at the bottom of this page:
http://forum.tlienhard.com/TS1000/www.t ... lities.htm
called crossassem2.text which was a Z80 assembly code file I wrote that you could drop your z80 code into, assemble with TASM on the PC and rename it to a .p file to run on the TS1000 (or zx81). I could recreate it but am hoping maybe someone may have a copy floating around.
I am currently writing software for the COleco Adam and want to make versions for the TS1000 and clones so this would be very helpful.
Bill H
Re: Help wanted
Posted: Tue Mar 13, 2018 1:35 am
by 1024MAK
Hell yes, the older members here will remember you
Welcome back to Sinclair ZX World.
I don't have the file you want though
But it would be good if you stick around and visit as much as you can
Mark
Re: Help wanted
Posted: Tue Mar 13, 2018 1:00 pm
by Bill H
Hi Mark - I'll be hanging around
Bill
Re: Help wanted
Posted: Tue Mar 13, 2018 3:09 pm
by XavSnap
Hi all!
Thanks Bill !
the mirroring is poor...
"
http://forum.tlienhard.com/TS1000/www.ts1000.us/files" is empty!
Could you (someone!) retrieve and send its content to us (Bill!)?
No way on archive.com:
Code: Select all
https://web.archive.org/web/20160521125452/http://forum.tlienhard.com/TS1000/www.ts1000.us/emulators-utilities.htm
[EDIT] ZX81 ROM disassembled (tasm) @
https://pub.meulie.net/Wearmouth/zx81.htm
Add #include "ZX81.sym" in the project @
http://zx81.vb81.free.fr/asm_tools/ZX81.sym
ZX81 P file structure example :
http://www.mofeel.net/785-comp-sys-sinclair/3158-2.aspx
Have fun...
Re: Help wanted
Posted: Tue Mar 13, 2018 3:49 pm
by gammaray
I noticed the files section on the mirror went empty several years ago before I joined SZXW...
Re: Help wanted
Posted: Tue Mar 13, 2018 4:04 pm
by Bill H
Failing that - how about a small .P file that has an autostarting ML program stored in a REM on the first line? I can work with that too. Would prefer an expanded DFILE in it but if not I can work around that.
Bill H
Re: Help wanted
Posted: Tue Mar 13, 2018 4:06 pm
by Moggy
Bill H wrote: ↑Tue Mar 13, 2018 12:41 am
Hi all, not sure if you remember me from the TS1000.us days but am hoping one of you can give me a hand. I am looking for something that used to be on the site, you can see the link at the bottom of this page:
http://forum.tlienhard.com/TS1000/www.t ... lities.htm
called crossassem2.text which was a Z80 assembly code file I wrote that you could drop your z80 code into, assemble with TASM on the PC and rename it to a .p file to run on the TS1000 (or zx81). I could recreate it but am hoping maybe someone may have a copy floating around.
I am currently writing software for the COleco Adam and want to make versions for the TS1000 and clones so this would be very helpful.
Bill H
Who could forget New York Bill?
Welcome back Buddy hope someone can come up with the goods.
Re: Help wanted
Posted: Tue Mar 13, 2018 5:11 pm
by Andy Rea
Bill H... whooey Welcome back my old friend... i remeber you and the TS1000 forum, it was good while it lasted.
Sorry i can't help witjh the file you seek.
Regards Andy
Re: Help wanted
Posted: Tue Mar 13, 2018 7:52 pm
by Bill H
So after an hour or so of recreating it I found it in the archive of ts1000's forum
http://forum.tlienhard.com/TS1000/www.t ... 824515.htm
Bill H
Re: Help wanted
Posted: Wed Mar 14, 2018 11:41 pm
by XavSnap
Got them:
Don't ask me where I found them...