Saved programs too noisy

General Chit Chat about Sinclair Computers and their Clones
User avatar
XavSnap
Posts: 890
Joined: Sat May 10, 2008 4:23 pm

Re: Saved programs too noisy

Post by XavSnap »

Hi Aurelbois,

You forgot to type the wiring diagram in a <code> box..
PC2Rec.jpg
Is it true ?
Xavier

User avatar
1024MAK
Posts: 2879
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: Saved programs too noisy

Post by 1024MAK »

To go from mono to stereo, connect both channels together in the stereo plug. Make sure you attach a label saying “both channels linked together”.

To go from a two channel (stereo) plug to mono, connect to the left channel only in the stereo plug and wire to the mono plug. The 0V/GND/screen obviously also needs to be connected. Don’t make any connection to the right channel in the stereo plug. Note that this assumes that the output device is driving both left and right channels with the same signal.

Mark

Aurelbois
Posts: 6
Joined: Wed Jul 10, 2019 7:36 pm

Re: Saved programs too noisy

Post by Aurelbois »

Hi XavSnap
Very good, that's what I wanted to display. Thanks
I used that circuit to create a cassette tape from a wave file using Windows 7

Aurelbois
Posts: 6
Joined: Wed Jul 10, 2019 7:36 pm

Re: Saved programs too noisy

Post by Aurelbois »

CarolineZX81 wrote:
Sat Feb 22, 2020 9:40 pm
Hi Xavsnap.

I will adjust the volume setting and see if that helps!
Any update on your problem
Thanks

Post Reply