Page 4 of 9

Re: Jupiter ACE (again)

Posted: Sun Dec 09, 2018 5:01 pm
by Lardo Boffin
Thanks. How does the PCB overlay part work? Does it have to be a specific material / thickness etc? Or is it just the case that applying pressure through the ‘keyboard’ makes a contact? Applogies for the very basic questions...

Re: Jupiter ACE (again)

Posted: Sun Dec 09, 2018 5:54 pm
by 1024MAK
The recreated PCB from the other thread looks like this:
Image

As you can see, the contacts are PCB tracks that when pressed on by a thin metal film will connect.

Mark

Re: Jupiter ACE (again)

Posted: Mon Dec 10, 2018 4:02 pm
by unxaix
McKlaud wrote:
Wed Oct 24, 2018 8:38 pm
RWAP wrote:
Wed Oct 24, 2018 7:59 pm
Excellent - do you plan on offering these for sale?
To be honest I've been thinking about a small batch that would include following items:
1. Jupiter ACE replica PCB
2. 96K RAMpack PCB
3. Twister Board PCB
4. Keyboard Overlay
5. RF modulator replacement

But the set would be in range of 30-35GBP + P&P. So, I've not decided yet.

Martin: The Twister is a small board that allows to connect to JACE interfaces designed for ZX81. In the past it was called "Trumpcard". See there: https://k1.spdns.de/Vintage/Sinclair/80 ... novonics)/


Hi McKlaud

Do you have any PCBs left you would like to sell of do you plan for another batch ?
Thank you very much.

Re: Jupiter ACE (again)

Posted: Mon Dec 10, 2018 6:13 pm
by McKlaud
unxiax: I’ve got a few boards left and not planning for any new batch.

Re: Jupiter ACE (again)

Posted: Mon Dec 10, 2018 8:20 pm
by unxaix
Hello McKlaud

Thank you very much for your reply.
All of them are sold out or do you still have some left ?
I would be interested in buying these :

1. Jupiter ACE replica PCB
2. 96K RAMpack PCB
4. Keyboard Overlay
5. RF modulator replacement

At least maybe the keyboard and RF modulator and RAMpack if the main PCB is not available anymore ?
Thank you very much.

Re: Jupiter ACE (again)

Posted: Thu Dec 13, 2018 2:51 pm
by AlexSinclair
Hi McKlaud! I'm interested too in a Jupiter Ace PCB and keyboard layout. I''m new in this forum and couln't send PM yet. I'm live in Buenos Aires. Thanks!
McKlaud wrote:
Sun Dec 09, 2018 2:46 pm
HullZX81man: Hi, PM sent.

Re: Jupiter ACE (again)

Posted: Fri Dec 14, 2018 10:44 pm
by gammaray
I was hoping for a complete kit... I don't have anything. Maybe McKlaud would publish gerbers or source PCB so we could make our own run...

Re: Jupiter ACE (again)

Posted: Fri Dec 14, 2018 10:57 pm
by McKlaud
So sorry, I would not publish Gerbers or source files for the main PCB on any public website. I am not going to order another batch of these boards in near future, because I am busy with a few bits and bobs for my Jupiter.

I should publish on there detailed photos how I made the keyboard useful. I hope I will find some spare time over Xmas holiday time.

gammaray: I can spare one board for you, but this will be my testing PCB, which partially assembled. I used this board for the 6.5MHz clock circuit testing. (PM sent)

Re: Jupiter ACE (again)

Posted: Fri Dec 14, 2018 11:05 pm
by gammaray
I was getting ready to try make a blank silicone keyboard for the spectrum cases for the ACE keyboard and other custom computers...

Re: Jupiter ACE (again)

Posted: Fri Dec 14, 2018 11:09 pm
by McKlaud
I've been thinking about re-designing the PCB completely and make Jupiter in the ZX Speccy format, using newer components like 6116 SRAM chips instead of 2114, but this is a long shot.