Sinclair ZX80 / ZX81 / Z88 Forums

Google found: "Full text of "c't (Magazin fuer Computertechnik) 12/1983"" https://archive.org/stream/ct8312/ct8312_djvu.txt Zubehör von Logitek Druckerinterface für ZX-Spectrum LPRINT, LUST, COPY läuft nun auch mit EPSON und Seikosha Druckern MX-80, GP-80 usw. Druck ohne Zeitverlust wie bei Druckerp...

AFAIK Memotech (and Sinclair?) ram packs have their own refresh counter. And other ram packs often use static ram, which does not need refresh.
Futhermore any usual ram access also does a refresh of the accessed ram columns.

There is a thread in the German Forum which gives possibilities to use partial Pascal without the need of using tape. It's for 48K RAM only, so not suitable for plain ZXPAND users. https://forum.tlienhard.com/phpBB3/viewtopic.php?t=4076 Meanwhile there is also a solution for "plain ZXPAND users" (3...

If you have the manual as DOC (MS-Word) or Open Office file, I could do the changes in that document and send it back to you.

Or I could make screenshots of the errors and could add a description, what needs to be done.

jdfan1000 wrote: ↑Sun Mar 21, 2021 3:51 am Ok, I believe I've finished cleaning it up and apply typographic magic.

This will also be on archive.org any minute now.

I found some misprints in the manual. And some functions and procedures are missing in chapter 5.13 (e. g. ram,usr,lsl,move,page).
Any chance, to update the manual?

Siggi

The program can be found there:
https://www.zx81stuff.org.uk/zx81/tape/ComputaCalc

Siggi

A very mysterious first message.
All this could also apply to Putin's project "Ukraine".

I have added a Mr.X soundboard to my ZxPand-system. Now I can also hear your great programs
Thanks
Siggi

Enjoying

Thanks
Siggi

Even if you have the DIN connector connected to a ZX81: the voltage levels at the DIN connector are much too low to be recognized by the ZX81 input circuit (DIN connectors use low levels and expect high impedance inputs, the ZX81 inputs are low impedance).

Siggi