Hi
Tested in my 42" LCD tv. There is no problem with image so it's a incompatibility with small LCD
Bye
José Leandro
P.D well, there is a problem.... the image is too big
Search found 13 matches
- Sat Jan 28, 2017 8:46 am
- Forum: Development
- Topic: ZXblast - ZX81 memory extension plus USB
- Replies: 215
- Views: 92118
- Thu Jan 26, 2017 9:08 pm
- Forum: Development
- Topic: ZXblast - ZX81 memory extension plus USB
- Replies: 215
- Views: 92118
Re: ZXblast - ZX81 memory extension plus USB
Hi The video timing could be slightly different when ZXblast config/or load function active. This should not result in problems but CRT TVs accept looser timings than some LCD TVs with special chipsets. I will check that out. I have no idea what you mean with blinking. Could you post a small video c...
- Wed Jan 25, 2017 8:44 pm
- Forum: Development
- Topic: ZXblast - ZX81 memory extension plus USB
- Replies: 215
- Views: 92118
Re: ZXblast - ZX81 memory extension plus USB
Hi Another question. I test zxblast with a zx81 and a TS1000 without modifications. It works well with both machines using CRT tv an a small LCD tv But Boring about video quality, I made simple composite video mod ( bc548 transistor ) to my zx81. With CRT tv, now I have what I want but with a small ...
- Mon Jan 23, 2017 11:14 pm
- Forum: Development
- Topic: ZXblast - ZX81 memory extension plus USB
- Replies: 215
- Views: 92118
Re: ZXblast - ZX81 memory extension plus USB
Hi Mine has come today :-) I solder it without problems (thanks for send it with smd chip soldered) . In my case, like I think i'll never put another interface, I've used a old zx spectrum connector with long pins ( to avoid space problem within zx81 and zxblast). zx81 with zxblast starts at first t...
- Mon Feb 16, 2015 11:24 pm
- Forum: Development
- Topic: LARKEN UTILS
- Replies: 18
- Views: 19152
Re: LARKEN UTILS
Hi I have seen the schematic in Eagle format which you have recommended, and I found some differences: R9 is shown in the schematic as 1Kohm, in the photo is 470ohm. R17 shown in the schematic as 468, in the photo is 470ohm. Thanks :-) I just change this little errors. I update schemes and board fil...
- Mon Feb 09, 2015 7:52 pm
- Forum: Development
- Topic: LARKEN UTILS
- Replies: 18
- Views: 19152
Re: LARKEN UTILS
Hi Original PCB has some wires across all pcb and some chips over other chips. If you take the eagle files for the "most original" PCB, you will have to make those wires and put chips like original PCB. I also include a "alternative" PCB with a reroute (no wires) and without chips over other chips. ...
- Mon Oct 06, 2014 8:50 pm
- Forum: Development
- Topic: LARKEN UTILS
- Replies: 18
- Views: 19152
Re: LARKEN UTILS
Hi
I have a working larken disk interface for TS1000 / zx81. It was a present from superfo
I have a article about it ( sorry, in spanish)
http://hardware.speccy.org/temp/zx81-larken.html
As you can see, zx81 is smaller that 5 1/4" driver XD XD XD
bye
José Leandro
I have a working larken disk interface for TS1000 / zx81. It was a present from superfo
I have a article about it ( sorry, in spanish)
http://hardware.speccy.org/temp/zx81-larken.html
As you can see, zx81 is smaller that 5 1/4" driver XD XD XD
bye
José Leandro
- Sat Sep 13, 2014 9:28 am
- Forum: ZX Spectrum Lounge
- Topic: Harlequin video modifications
- Replies: 40
- Views: 42694
Re: Harlequin video modifications
Hi My name is José Leandro and I helped superfo with the develop of the first versions ( a-e) of the Harlequin clone. First: I would to say sorry because English isn't my first language and I don't have enough level to have a fluent convertation Also because I'm direct person and not very polite. I ...
- Fri Apr 26, 2013 8:04 pm
- Forum: Hardware
- Topic: no video output on ts 1000
- Replies: 12
- Views: 4675
Re: no video output on ts 1000
Hi
Check TR2 transistor. If it doesn't work, the ts100 / zx81 has not clock and it shows a black/grey screen without cursor.
Bye
José Leandro
Check TR2 transistor. If it doesn't work, the ts100 / zx81 has not clock and it shows a black/grey screen without cursor.
Bye
José Leandro
- Sat Feb 02, 2013 11:23 pm
- Forum: Hardware
- Topic: Transfer zx81 <> PC
- Replies: 6
- Views: 3101
Re: Transfer zx81 <> PC
Hi Ok, just read the French page. God was that a long time ago that I took French at school. But it's still better than my Latin ;) Anyway. A modified gal for zxpand will do the g Job. Permanently map the 32k of zxpand to 16-48k disregarding the config setting. For test purpose it's enough to config...