ZX81 strange keyboard problem?

Anything Sinclair ZX Basic related; history, development, tips - differences between BASIC on the ZX80 and ZX81
User avatar
1024MAK
Posts: 5332
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ZX81 strange keyboard problem?

Post by 1024MAK »

hyttju wrote: Thu Jul 20, 2017 10:38 am I can not change line so it is impossible to run commands.


Here is a picture of what came up when i wrote

10 print "hello world"
And what happened when you pressed the [NEW LINE] (enter/return) key?

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Autumn is here. Bye bye summer 2024...
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: ZX81 strange keyboard problem?

Post by sirmorris »

Something is wrong with the addressing logic used to select the character data. The ULA uses the character code in the dfile as part of the calculated address of the character's bitmap data in ROM. It's consistently wrong, not random.

The ULA looks in the d-file and sees '1' but produces '-'. 'P' is unaffected. As are L,O,R and space.

Code: Select all

'1' = 1Dh,  00011101b

'-' = 16h,  00010110b

'P' = 35h,  00110101b
So to turn '1' into '-' you remove bit 3. Bit 3 is clear in 'P' and therefore it remains unaffected.

Because the computer is working this problem with A3 has to be internal to the ULA. If A3 were damaged on the processor side then seemingly random opcodes would be executed and the computer would not work.
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 strange keyboard problem?

Post by Andy Rea »

sirmorris wrote: Thu Jul 20, 2017 11:12 am .

Because the computer is working this problem with A3 has to be internal to the ULA.
Or it is not connected / dry jointed at the ula

We gotta be optimistic that the ula ain't dead 😁

Regards
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 strange keyboard problem?

Post by Andy Rea »

I'm.more convinced on the open circuit idea now, i. The word PRINT the wrong letters à3 is high but in the word HELLO the wrong letters a3 is low this pattern will reapeat every 8 characters as à3 is following the refresh register as it counts down across the screen...

Regards
what's that Smell.... smells like fresh flux and solder fumes...
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: ZX81 strange keyboard problem?

Post by sirmorris »

Andy Rea wrote: Thu Jul 20, 2017 11:46 amOr it is not connected / dry jointed at the ula
Yes that's a possibility but then other functions that rely on a3 would be broken - kb input for example.

I didn't carry on to check my theorem so I missed the fact that the other wrong letters had a3 pulled high. Shame on me :lol:
User avatar
1024MAK
Posts: 5332
Joined: Mon Sep 26, 2011 10:56 am
Location: Looking forward to summer in Somerset, UK...

Re: ZX81 strange keyboard problem?

Post by 1024MAK »

I think an internal ULA fault is the most likely. However, a poor connection could result in some functions working, while others don't work. As the impedance of the electrical circuit may affect the voltage level.

Mark
ZX81 Variations
ZX81 Chip Pin-outs
ZX81 Video Transistor Amp

:!: Standby alert :!:
There are four lights!
Step up to red alert. Sir, are you absolutely sure? It does mean changing the bulb :!:
Autumn is here. Bye bye summer 2024...
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: ZX81 strange keyboard problem?

Post by sirmorris »

Code: Select all

E A   E  A   E     A
- -   -  -   -     -
1 -   1d 16  1101  0110
0 =   1c 14  1100  0100
p p   35 35        0101
r r   37 37        0111
i a   2e 26  1110  0110
n n   33 33        0011
t l   39 31  1001  0001
h 9   2d 25  1101  0101
e 6   2a 22  1010  0010
l l   31 31        0001
o o   34 34        0100
w o   3c 34  1100  0100
d 5   29 21  1001  0001
Bit 3 forced to zero in every case. Well that killed 10 minutes :?
sirmorris
Posts: 2811
Joined: Thu May 08, 2008 5:45 pm

Re: ZX81 strange keyboard problem?

Post by sirmorris »

sirmorris wrote: Thu Jul 20, 2017 12:34 pmI didn't carry on to check my theorem so I missed the fact that the other wrong letters had a3 pulled high. Shame on me :lol:
Double shame for doubting myself :oops: :lol: :lol:
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 strange keyboard problem?

Post by Andy Rea »

Oops sorry everyone think my brain is addled :oops: Guess this is what happens when one neglects the humble zeddy for so long
what's that Smell.... smells like fresh flux and solder fumes...
User avatar
Andy Rea
Posts: 1606
Joined: Fri May 09, 2008 2:48 pm
Location: Planet Earth
Contact:

Re: ZX81 strange keyboard problem?

Post by Andy Rea »

Oh one more thing, just to be sure I'm completely bonkers and haven't a clue as to what's going on... we all going bit 3 of the character code translates into bit 6 ( A6' on the ula ) because we have the line counter at A0' A1' A2'.

It is very odd that it's only presenting a logo. Low during character generation and not all the time. But i guess it is looking like the ula is frazzled.

Regards.

P.s. do they do certificates in crazy :mrgreen:
what's that Smell.... smells like fresh flux and solder fumes...
Post Reply