48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switches

User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switches

Post by PokeMon »

Especially for the Harlequin and due to some member request on the german board I developed a keyboard with a printed cover panel which can be plugged into any ZX Spectrum 16k/48k board as well. The SMD tactile switches give a reasonable keyboard feeling for easy typing and are a longlife solution with specified minimum 500,000 key presses.
The attachment IMG_7924kks.jpg is no longer available

There are 2 versions existing:

48K-KDLXS as standalone with the printed keyboard layout on the cover - for use with the harlequin or any other ZX Spectrum where the rubber mat or faceplate is missing or damaged. The board fits into the plastic top cover from the case.
IMG_7924kks.jpg
IMG_7924kks.jpg (111.68 KiB) Viewed 13717 times


48K-KDLXR for use under the original rubber mat and faceplate instead of a standard membrane. This version requires other tactile switches than the version with the printed cover panel.
IMG_8003kks.jpg
IMG_8003kks.jpg (147.96 KiB) Viewed 13717 times

The connection to the main board is made with MOLEX jumper cables of type 25001 which will fit into the MOLEX connectors. They cable jumpers have a rigid core which is flexible enough to bend the cable in a sharp curve as needed for the small ZX Spectrum case.
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

Here are some more pics to see ...
The standalone version 48K-KDLXS
IMG_7998kks.jpg
IMG_7998kks.jpg (148.84 KiB) Viewed 13715 times
IMG_8006kks.jpg
IMG_8006kks.jpg (72.07 KiB) Viewed 13715 times
IMG_7953kks.jpg
IMG_7953kks.jpg (121.21 KiB) Viewed 13715 times
Last edited by PokeMon on Fri Oct 17, 2014 12:17 am, edited 1 time in total.
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

The rubber mat version 48K-KDLXR ...
IMG_7935kks.jpg
IMG_7935kks.jpg (66.81 KiB) Viewed 13715 times
IMG_7963kks.jpg
IMG_7963kks.jpg (132.02 KiB) Viewed 13715 times
IMG_7966kks.jpg
IMG_7966kks.jpg (151.08 KiB) Viewed 13715 times
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

The switches for the rubber mat version have a reduced height of 0.55mm while the keyboard pcb is also smaller with 1.2mm.
The height will be approx. 1 to 1.5 mm more than with the standard membrane.
IMG_7965kks.jpg
IMG_7965kks.jpg (137.12 KiB) Viewed 13717 times
IMG_7969kks.jpg
IMG_7969kks.jpg (142.6 KiB) Viewed 13717 times
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

The standalone version may also be used as replacement for a rubber mat / faceplate combination (if not good anymore):
IMG_8007kks.jpg
IMG_8007kks.jpg (156.09 KiB) Viewed 13717 times
IMG_8008kks.jpg
IMG_8008kks.jpg (153.46 KiB) Viewed 13717 times
IMG_8009kks.jpg
IMG_8009kks.jpg (115.52 KiB) Viewed 13717 times
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

They are available now at sellmyretro.com as PCB only, assembly kit or as complete soldered/mounted keyboard.
http://www.sellmyretro.com/user/profile/PokeMon/

Have fun. 8-)
fatbob_gb
Posts: 15
Joined: Thu Apr 21, 2011 2:58 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by fatbob_gb »

I have just recieved my zx81 version & it is very nice indeed, any idea when the zx80 one will be available?
User avatar
PokeMon
Posts: 2264
Joined: Sat Sep 17, 2011 6:48 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by PokeMon »

Thanks for feedback.
I have the printed covers for ZX80 keyboard layout as well but not sure how it could be used reasonably in a ZX80 as the ZX80 does not have the Molex connectors.
I have the idea to use it with some spring contacts at the main board, not tested yet myself.
So how would you like to use it and with what kind of hardware / connection ? ;)
fatbob_gb
Posts: 15
Joined: Thu Apr 21, 2011 2:58 pm

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by fatbob_gb »

I was thinking of using it with a ZX81 motherboard converted to ZX80, either that or buy the kit and then use the switches & membrane on my ZX80 core.
User avatar
yerzmyey
Posts: 1240
Joined: Thu May 15, 2008 10:11 am
Location: Rubber Planet
Contact:

Re: 48K-KDLX - ZX Spectrum 48k keyboard w. smd tactile switc

Post by yerzmyey »

Hmm, there is too much on the profile. I'm totally confuse what is what.

What is better, Pokemon - the mat (along with the normal rubber keyboard) or the standard membrane?
What does work better? What will "live" longer?



PS: Anyway, in some time I might go for this one
Image
just to have one in one of my Spectrums although I wonder too, what is more... "resilient / vital", You know.
IN NIHILUM REVERTERIS - a big text-adventure game for ZX81: http://tiny.pl/g2m6m
"MONOCHROME" issue 5 - (Spring 2014) free paper/PDF magazine about ZX81: http://tiny.pl/q2m44
ZX81 COMPETITIONS 2007/2009: http://zx81.republika.pl/
Post Reply