ZXpand enclosures available

ZX80 / ZX81 hardware and software offered for sale or swapping
User avatar
mhudson52
Posts: 141
Joined: Tue Sep 27, 2016 2:17 am
Location: Decatur, Alabama (US)

ZXpand enclosures available

Post by mhudson52 »

I still have 3d-printed enclosures for sirmorris' ZXpand board available on SMR. Now that I have one of his AY boards (thanks, Charlie) the enclosure that will accommodate them both will coming very soon.
TS 1000 bought in 1982 and brought back to life by Sir Ian
User avatar
dasteph
Posts: 40
Joined: Fri Nov 27, 2015 2:51 am
Location: Sydney, AU
Contact:

Re: ZXpand enclosures available

Post by dasteph »

Hi mhudson52, I went to grab the one other day, but it tells me that "Seller does not ship to your region". :(
nollkolltroll
Posts: 325
Joined: Sat Sep 27, 2014 8:02 pm
Location: Stockholm, Sweden

Re: ZXpand enclosures available

Post by nollkolltroll »

Perfect, I was wondering about an AY-enabled version. Waiting...
/Adam
schombi
Posts: 19
Joined: Thu May 05, 2016 6:43 am

Re: ZXpand enclosures available

Post by schombi »

I´d also need one for the AY version.
Moggy
Posts: 3231
Joined: Wed Jun 18, 2008 2:00 pm

Re: ZXpand enclosures available

Post by Moggy »

Ditto.
User avatar
mhudson52
Posts: 141
Joined: Tue Sep 27, 2016 2:17 am
Location: Decatur, Alabama (US)

Re: ZXpand enclosures available

Post by mhudson52 »

Good news guys! Thanks to Charlie I have finalized the design of the ZXpand+AY enclosure and it is being printed at this moment. I plan to go ahead and print several and get them listed on SMR as soon as possible. Since it is larger and takes longer to print (and a little more material as well) I will be listing them at $20 US. Shipping should stay the same as before.
TS 1000 bought in 1982 and brought back to life by Sir Ian
schombi
Posts: 19
Joined: Thu May 05, 2016 6:43 am

Re: ZXpand enclosures available

Post by schombi »

Good news! Thanks a lot.
User avatar
mhudson52
Posts: 141
Joined: Tue Sep 27, 2016 2:17 am
Location: Decatur, Alabama (US)

Re: ZXpand enclosures available

Post by mhudson52 »

Hey guys, the ZXpand+AY enclosure is now up on the SMR web site. Note that this is for the AY that was shipped with the longer connection pin strips. There is a photo of this pin in the picture gallery of the long pin strip, so you'll need to look at yours to see which type you have.

I am in the process of producing enclosures for the "short pin" design which will will be listed in a couple of days.
TS 1000 bought in 1982 and brought back to life by Sir Ian
schombi
Posts: 19
Joined: Thu May 05, 2016 6:43 am

Re: ZXpand enclosures available

Post by schombi »

Great! Just ordered one :)
User avatar
mhudson52
Posts: 141
Joined: Tue Sep 27, 2016 2:17 am
Location: Decatur, Alabama (US)

Re: ZXpand enclosures available

Post by mhudson52 »

Schombi, so you have the "long pin" connector strips? Just want to make sure sure I explained the differences clearly enough so everyone gets the version they need. 8-)
TS 1000 bought in 1982 and brought back to life by Sir Ian
Post Reply