ZX81 internal screws

[Lardo Boffin]

Hi all

I have just bought a nice issue one zeddy but it is missing its internal screws to hold the pcb in place and also one of the external screws - the middle one near the edge connector.

Does anyone know what the spec of these is or if anyone sells them?

Many thanks!

Lardo

[siggi]

I replace missing or defective screws by those, which are used in my garden railway:
http://www.lgb.de/de/produkte/zubehoer_ ... ehoer.html

Here is a set of similar screws, where you can get the dimensions of the screws from:
http://www.die-gartenbahn.de/Gartenbahn ... --TRL.html

Regards
Siggi

[Lardo Boffin]

I replace missing or defective screws by those, which are used in my garden railway:
http://www.lgb.de/de/produkte/zubehoer_ ... ehoer.html

Here is a set of similar screws, where you can get the dimensions of the screws from:
http://www.die-gartenbahn.de/Gartenbahn ... --TRL.html

Regards
Siggi

Ooh! I need some of these screws as well - unfortunately I only speak English (just). What are the correct sizes for these motherboard screws please?

Thanks

Lardo

[siggi]

The srews (described in the last link) with diameter 2,2 mm can be used inside and outside (housing) of the Zeddy:
M2,2x 6,5
M2,2x 9,5

I don't know, what size (in milli-Inch or nano-Foot ) they have in the English speaking part of the universe

Siggi

[Lardo Boffin]

The srews (described in the last link) with diameter 2,2 mm can be used inside and outside (housing) of the Zeddy:
M2,2x 6,5
M2,2x 9,5

I don't know, what size (in milli-Inch or nano-Foot ) they have in the English speaking part of the universe

Siggi

We have the metric system but still like pounds, shillings and pence!

The sizes are great thanks.

I assume that the M2.2x6.5 can be used to screw the motherboard to the inside of the case?

Lardo

[1024MAK]

Err, we have metric, plus various imperial sizes. For both coarse thread screws and for fine pitched machine screws / bolts.

Mark