What is the going price to have EPROMs burnt?

Discussions about Sinclair ZX80 and ZX81 Hardware
paul ron
Posts: 17
Joined: Wed Oct 04, 2017 2:37 am
Location: nyc

What is the going price to have EPROMs burnt?

Post by paul ron » Fri Oct 13, 2017 2:09 am

I was going through my closets and found a ton of EPROMs of all flavors.

So I wondered, what is the going price to have these chips burnt for custom ROMs and ZX upgrade ROMs... etc?
The more you say the less people hear.

gozzo
Posts: 444
Joined: Fri Jul 08, 2011 7:52 pm

Re: What is the going price to have EPROMs burnt?

Post by gozzo » Fri Oct 13, 2017 2:58 am

are you thinking of offering an eprom burning service, or are you after someone to burn some for you?

paul ron
Posts: 17
Joined: Wed Oct 04, 2017 2:37 am
Location: nyc

Re: What is the going price to have EPROMs burnt?

Post by paul ron » Fri Oct 13, 2017 4:39 am

interesting idea.... I'll have to dig the rest of my closets to find my burners, and I'd have to fire up the old XT since my old burners were DOS based, providing I find the software with them.

no (m not going in business. just curious what the cost of burning EPROM is.

I once had a board I built for my spectrum that allowed me to store and run programs from EPROM. perhaps having more programs put on eproms might be worth the cost of having them done.
The more you say the less people hear.

User avatar
mrtinb
Posts: 524
Joined: Fri Nov 06, 2015 4:44 pm
Location: Denmark
Contact:

Re: What is the going price to have EPROMs burnt?

Post by mrtinb » Fri Oct 13, 2017 5:35 am

I haven't got an EPROM burner but I've found an article on how to use an Arduino as a burner. I think this will be sufficient for me.

I'm trying to say that it's not so difficult as it used to be, to burn an EPROM, because the Internet has given so many possibilities.

The cost is falling rapidly like the cost of manufacturing a PCB has.
Martin
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube

User avatar
sirmorris
Posts: 2699
Joined: Thu May 08, 2008 4:45 pm
Location: oxon, uk

Re: What is the going price to have EPROMs burnt?

Post by sirmorris » Fri Oct 13, 2017 8:09 am

For another project that I run I sell EPROMS for £2 + postage. If someone sends me an EPROM I won't charge to burn it for them. In truth they never do, though :)
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

User avatar
1024MAK
Posts: 1803
Joined: Mon Sep 26, 2011 9:56 am
Location: Looking forward to summer in Somerset, UK...

Re: What is the going price to have EPROMs burnt?

Post by 1024MAK » Fri Oct 13, 2017 8:45 am

Many of the hardware hackers and tinkerers will have a programmer.

When members do ask if someone can 'burn' an EPROM (or a EEPROM / flash chip) for them, often a nearby member will only ask for the cost of return postage. Although you may often see an offer of a free beer from the member asking for help as a thank you.

The remaining repair businesses will also program chips, but of course they will charge for this service. I don't think it costs that much, but seeing as I have my own programmers, I have never asked...

Mark

User avatar
mrtinb
Posts: 524
Joined: Fri Nov 06, 2015 4:44 pm
Location: Denmark
Contact:

Re: What is the going price to have EPROMs burnt?

Post by mrtinb » Fri Oct 13, 2017 8:47 am

This is a curcuit for an EEPROM burner.

http://www.ichbinzustaendig.de/dev/meeprommer-en

This is a mapping between Arduino Nano -> Arduino Uno, if that's what you got.

http://www.instructables.com/file/F9JQU ... ize=MEDIUM
Martin
ZX81, Lambda 8300, Commodore 64, Mac G4 Cube

User avatar
1024MAK
Posts: 1803
Joined: Mon Sep 26, 2011 9:56 am
Location: Looking forward to summer in Somerset, UK...

Re: What is the going price to have EPROMs burnt?

Post by 1024MAK » Fri Oct 13, 2017 8:50 am

mrtinb wrote:
Fri Oct 13, 2017 5:35 am
I haven't got an EPROM burner but I've found an article on how to use an Arduino as a burner. I think this will be sufficient for me.
Just be aware that the EPROMs that require either a 21V or a 25V supply for programming are very power hungry and some cheap programmers that only run from from a 5V DC USB supply often fail to correctly 'burn' these older EPROMs.

These days, EEPROMs and flash chips can be used, and most of them only need a normal 5V DC supply during programming :D

Mark

Lardo Boffin
Posts: 661
Joined: Sat Nov 26, 2016 1:42 am

Re: What is the going price to have EPROMs burnt?

Post by Lardo Boffin » Fri Oct 13, 2017 10:35 am

The last burnt eprom I bought cost £4 plus p&p.
ZX81 iss 1 (bugged ROM, kludge fix, normal, kit)
Iss 3 with ZXVid, another in nearly perfect box
TS 1000 iss 3, ZXPand AY, ZX8-CCB & ZX-KDLX
TS 1500
TS 2000
Spectrum 16k (iss 1 s/n 1499)
Spectrum 48k
Toastrack + DIVMMC future

User avatar
sirmorris
Posts: 2699
Joined: Thu May 08, 2008 4:45 pm
Location: oxon, uk

Re: What is the going price to have EPROMs burnt?

Post by sirmorris » Fri Oct 13, 2017 10:49 am

Some types command higher prices due to their rarity and/or difficulty of programming. The TI 25xx series for example. You often need a more specialist programmer (read: expensive) for these.
--=== ZXpand+ ... A more moderner all-in-one upgrade solution for ZX81 ===--
* SD/MMC storage * 32K Hires-capable RAM * AY sound chip * Joystick port * Serial *
* BASIC enhancements - plug & play * Reset button * Auto-boot facility *

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests